Breville BES900XL manual First USE, Start UP, Power Save Mode, General Operation, CUP Button

Page 7

Operating your Breville Dual Boiler™

Operating your Breville Dual Boiler™

FIRST USE

Initial Start Up

Fill water tank with cold, preferably

filtered water. You can do this by either

opening the top-fill water tank lid (push

to open), or by removing the water tank

at the back of the machine.

Check STEAM LEVER and HOT

WATER dial are in the CLOSED

position.

Press the POWER button to switch the

machine On. The POWER button will

flash and the LCD screen will display the

TIP

To easily maneuver your machine, use the drop down swivel foot located under the drip tray. When turned to the UNLOCK position, the swivel foot drops down and lifts the machine upwards, making it easier to access the rear water tank or reposition the machine to another location.

START UP

Press the POWER button to switch the

POWER SAVE MODE

The machine will enter POWER SAVE mode after remaining idle for 1 hour and turn Off completely if not used for a continuous

4 hour period (refer to ‘Auto Power Off’, page 21).

Pressing any button during POWER SAVE mode (except POWER), or operating the STEAM LEVER or HOT WATER dial will cause the machine to enter START UP mode.

Pressing the POWER button during POWER SAVE will turn the machine Off.

3. Clock

Displays current time. The default is 12:00AM if the time has not been set. See ‘Set Clock’, page 17.

current espresso boiler temperature.

A pumping sound will be heard

indicating empty boilers are being

filled with water for the first time. This

is normal. During this time, rotate the

HOT WATER dial to the OPEN position

to “prime” the espresso boiler. When

water starts to flow from the Hot Water

outlet, rotate the HOT WATER dial to

the CLOSED position.

When the machine has reached the default

operating temperature (200˚F / 93˚C), the

POWER button light will stop flashing and

the MANUAL, 1 CUP and 2 CUP buttons

will illuminate. The machine is now in

STANDBY mode, ready for the next step

‘Flushing The Machine’.

Flushing The Machine.

When the machine has reached STANDBY mode, run the following 3 steps:

1.Press 2 CUP button to run water through group head.

2.Rotate HOT WATER dial to the OPEN position and run for 30 seconds.

3.Move STEAM LEVER to the OPEN position and run for 10 seconds.

Repeat this cycle until tank is empty.

machine On. The POWER button will flash and the LCD screen will display the current espresso boiler temperature.

When the machine has reached the default operating temperature (200˚F / 93˚C), the POWER button light will stop flashing and the MANUAL, 1 CUP and 2 CUP buttons will illuminate. The machine is now in STANDBY mode ready for use.

NOTE

The machine is in START UP mode when the POWER button light is flashing. During this time, the MANUAL, 1 CUP and 2 CUP buttons will be disabled. Similarly, if you press the MENU button during START UP mode and select SHOT VOL or CLEAN CYCLE, the LCD screen will display BUSY.

Always wait until the machine is in STANDBY mode. This is when the POWER button light stops flashing and the MANUAL, 1 CUP and 2 CUP buttons illuminate.

LCD INTERFACE

Display modes

3 modes can be displayed on the LCD screen: Shot Temp, Shot Clock or Clock.

Press UP or DOWN arrow to change the display mode.

1. Shot Temp

Displays selected extraction temperature. The default is set at 200°F (93°C), but can be changed from 190°F - 205°F (86°C - 96°C).

See ‘Extraction Temperature’, page 16.

2. Shot Clock

Displays duration of current espresso extraction in seconds. See ‘Extraction Guide’, page 27.

GENERAL OPERATION

1 CUP BUTTON

Press 1 CUP button once to extract a single shot of espresso at the pre-programmed volume (approx. 1oz / 30ml). The extraction will start using the low pressure pre-infusion.

The machine will stop after 1 CUP volume has been extracted and will return to STANDBY mode.

12

 

13

 

 

 

Image 7
Contents BES900XL Breville Customer Service CenterCongratulations Important safeguards Precision control Additional featuresKnow Triple Heat SystemProgrammable Functions Not ShownLCD Interface Display ModesMachine Preparation OperatingBefore First USE Conditioning the Water FilterGeneral Operation Power Save ModeFirst USE Start UPManual Button SteamHot Water LCD Programming FunctionsSet Clock Shot VolumeExtraction temperature Auto Start turning the feature ON/OFFResetting Default Settings Clean CycleAdvanced Functions Alerts AdvanceD programmingService Clean MeSelecting Filter Basket Coffee Making Tips PreparationCoffee Making Tips & Preparation PRE-HEATINGPurging the Group Head Extracting EspressoTexturing Milk Hints & TipsCare & Cleaning Care & CleaningCleaning Cycle Cleaning the Outer Housing & CUP Warming Tray Cleaning the Steam WandCleaning the Shower Screen Cleaning the Drip & Storage TrayTroubleshooting TroubleshootingPossible Causes What to do Steam pouring out Start time E1, E2 or E3 errorMachine is On but Ceases to operateEspresso Coffees to TRYCoffees to TRY CappuccinoToll free phone number One year limited warrantyTable DES Matières FélicitationsImportantes Mesures DE Sécurité Breville Vous Recommande LA Sécurité Avant ToutContrôle DE Précision Faites LA ConnaissanceCaractéristiques DE Votre Dual Boilermc DE Breville Triple Système DE ChauffagePID Faites LA Connaissance DE Votre Dual Broilermc DE BrevilleNON Illustrés Interface ACLPréparation de la machine FonctionnementAvant LA Première Utilisation Préparation DU Filtre À EAUPremière Utilisation Mode D’ÉCONOMIE D’ÉNERGIEDémarrage Touche ‘MANUAL’ EAU ChaudeTouche 2 Tasses Fonctionnement Général Touche 1 TasseRégler L’HEURE Volume D’ESPRESSOProgrammation DES Fonctions SUR Écran ACL Température D’EXTRACTIONFonctions Avancées Démarrage automatique réglage ON/OFF Marche/ArrêtCycle DE Nettoyage Rétablir LES Réglages PAR DéfautAlertes Clean me! Nettoyez-moi Choisir LE PANIER-FILTRE Trucs & Préparation DU CaféTrucs & Préparation DU Café PréchauffageVidanger LE Groupe Dosage ET Tassage DU CaféInsérer LE PORTE-FILTRE Extraire L’ESPRESSOTrucs & Astuces Entretien & Nettoyage Entretien NettoyageNettoyage DU Boîtier ET DU CHAUFFE-TASSE Nettoyage LA Buse VapeurNettoyage DES PANIERS-FILTRES ET DU PORTE-FILTRE Nettoyage DE L’ÉCRAN DiffuseurGuide DE Dépannage Guide DE DépannageProblème Causes Possibles CE QU’IL Faut Faire De la vapeur s’échappe du La machine est enMarche, mais cesse de FonctionnerSuggestions DE Cafés Suggestions DE CafésNuméro sans frais Garantie Limitée D’UN ANCourriel
Related manuals
Manual 40 pages 7.14 Kb

BES900XL specifications

The Breville BES900XL, also known as the Dual Boiler Espresso Machine, is a high-performance espresso maker designed for home baristas who seek professional quality in the comfort of their kitchen. This machine combines innovative technology with user-friendly features to create exceptional espresso beverages, making it a popular choice among coffee enthusiasts.

One of the standout features of the BES900XL is its dual boiler system. Unlike traditional espresso machines that use a single boiler for both brewing and steaming, this model utilizes two separate stainless steel boilers. This design allows for simultaneous brewing and steaming, which is essential for producing café-quality drinks like lattes and cappuccinos. With the ability to maintain consistent temperatures, the dual boilers ensure that the espresso extraction and milk frothing processes occur perfectly.

Temperature control is another key characteristic of the Breville BES900XL. It offers precise PID (Proportional-Integral-Derivative) temperature control, which enables users to select and maintain the ideal brewing temperature. This precision is critical for extracting the best flavors and aromas from coffee grounds, enhancing the overall espresso experience.

Additionally, the BES900XL features a shot clock, which helps users monitor the timing of their espresso extraction. This built-in timer assists in achieving the ideal shot duration, allowing for a more consistent and delicious brew. The machine also boasts a large water tank with a capacity of 84 ounces, reducing the frequency of refills during busy brewing sessions.

The BES900XL is equipped with a powerful steam wand for frothing milk. This steam wand features a 360-degree rotation, enabling baristas to create various milk textures and designs with ease. The manual control allows users to adjust the pressure and steam as needed, ensuring that they can achieve the desired microfoam for their coffee creations.

Durability is another essential aspect of the Breville BES900XL, which is built with high-quality materials and components. Its brushed stainless steel construction not only gives it a sleek appearance but also ensures longevity and resilience in daily use.

With its wealth of features, including dual boilers, precise temperature control, and a powerful steam wand, the Breville BES900XL caters to coffee lovers looking to elevate their espresso-making skills. Whether crafting a morning espresso or delivering a sophisticated latte art, this machine empowers users to achieve professional results at home.