Crown Boiler BWC300 instruction

WARNING

Failure to ensure that the chimney is clean, leak tight, water tight, and structurally sound could result in severe corrosion damage to the boiler, damage to the vent system, restriction of combustion air supply, or the entry of ﬂue products into the structure which in turn could cause unreliable operation, property damage, personal injury, or loss of life.

4)Installation of this kit will require an opening at the base of the chimney (at the level of the horizontal vent connection) that is approximately 7” wide and 12” tall. A slightly smaller, or signiﬁcantly larger opening may be required depending on the chimney wall thickness. Before attempting to install this kit, make sure that such an opening either exists, or can be made, without compromising the structural integrity of the chimney (much of this opening will be re-closed later in the installation process).

5)Maximum distance from center of chimney chase to outside surface of chimney base is 23” (Figure 1.2).

6)Verify that there are no offsets in the chimney that will cause the PPs Flex Liner to bend more than 45 degrees.

7)Verify that it will be possible to maintain a 5/8in per ft. pitch towards the boiler in all horizontal piping between the boiler and the elbow at the base of the chimney chase.

8)PPs Flex Liner and the hardware needed for a single PPs Flex Liner installation are sold separately. All hardware is included in a “PPs Flex Installation kit”. Table 1.1 shows the Crown part numbers for these kits and the PPs Flex Liner itself.

BWC300 specifications

The Crown Boiler BWC300 is a high-efficiency, oil-fired hot water boiler designed for residential and commercial heating applications. With an emphasis on durability, performance, and user-friendliness, the BWC300 stands out as a reliable choice for those seeking consistent heat.

One of the main features of the BWC300 is its robust construction, featuring a cast iron heat exchanger that efficiently transfers heat while providing long-term reliability. The boiler is engineered with an innovative texturing process that enhances its thermal efficiency. This design maximizes heat transfer and minimizes energy waste, thus ensuring lower utility bills and a reduced carbon footprint.

The BWC300 is equipped with a powerful burner system that provides precise control over temperature and fuel consumption. The oil burner operates with a low-noise design and is built for easy maintenance. The boiler is compatible with various oil types, allowing users to select the most economical fuel option available in their region.

In terms of technological advancements, the Crown Boiler BWC300 incorporates a digital control module that enables users to monitor and adjust settings remotely. This feature allows homeowners and business owners to achieve optimal heating performance while maintaining energy efficiency. Additionally, the boiler comes with a built-in safety shut-off system that prevents overheating, ensuring peace of mind for users.

The BWC300 also features a compact design, making it suitable for installation in tight spaces. Its lightweight construction further simplifies the installation process, reducing labor costs and time. The unit comes with an integrated condensate drain that ensures efficient operation, even when running at lower temperatures.

Maintenance is an important consideration for any boiler system, and the BWC300 addresses this by providing easy access to key components. Routine service checks can be performed quickly, ensuring the system operates at peak efficiency throughout its lifespan.

Overall, the Crown Boiler BWC300 is a remarkable option for those in need of a reliable and efficient heating solution. With its durable construction, advanced technology, and emphasis on user-friendliness, it symbolizes a long-term investment in home or business comfort. Whether for residential or commercial applications, the BWC300 delivers consistent performance and reliability, making it a worthy consideration for any heating project.