![Attaching Horizontal Track to](/images/new-backgrounds/46530/4653037x1.webp)
11 | Attaching Horizontal Track to | horizontal | flagangle |
| Quick Install Flagangle | track |
|
Tools Needed: | NOTE: If you have fully adjustable |
|
|
7/16” Socket | flagangle, skip this step and complete | key slot |
|
Step 12. |
|
| |
|
|
| |
Ratchet Wrench | To install horizontal track, align key slot | QUICK |
|
| INSTALL |
| |
| of the horizontal track with the quick |
| |
7/16” Wrench | TAB |
| |
install tab of the flagangle. Push curved |
|
| |
|
|
| |
Level | portion of horizontal track down to lock | vertical |
|
in place. |
| ||
|
| ||
|
| track |
|
Level horizontal track and bolt the top curve of the low headroom horizontal track slot in the flagangle using (1)
5/16” washer, (1) 1/4”- 20 x 9/16” track bolt and (1) 1/4”- 20 flange hex nut. Repeat for other side.
NOTE: If an idrive® opener will be | horizontal | flagangle |
installed, position horizontal tracks | track | |
|
| |
slightly above level. |
|
|
NOTE: After completing this step, | QUICK |
|
continue with Step 13. | INSTALL |
|
TAB |
| |
|
|
key slot
vertical
track
|
| (1) 1/4”- 20 x 9/16” |
flagangle | ||
|
| track bolt |
|
|
|
(1) 5/16” washer
(1) 1/4”- 20 flange hex nut
top curve of
low headroom
horizontal track
Please Do Not Return This Product To The Store. Contact your local | 19 |
To find your
INSTALLATION