|
|
8 | Stacking Sections |
| |
|
|
Tools Needed: | NOTE: For door section identification see |
Power Drill | page 4. |
| |
7/16” Socket | NOTE: Make sure hinge leafs are flipped |
Driver | down, when stacking another section |
| on top. |
| Place rollers in hinge tubes of the |
| second section (lock section). With |
| assistance, lift second section and guide |
| rollers into the vertical tracks. |
| Align vertical marks in the upper |
| alignment sticker, with the lower |
| alignment sticker on right hand side |
| on the back of door. Keep sections |
| aligned and fasten hinges to connect |
| the sections using 1/4” - 14 x 5/8” |
| |
| section(s) except top section. |
| IMPORTANT: When securing the end |
| hinges to the sections with 1/4” |
| - 14 x 5/8” |
| ensure they are attached as |
| shown in the illustrations above. |
IMPORTANT: Push & hold the hinge leafs against section while securing with 1/4” - 14 x 5/8” self- tapping screws. End Hinges have
(2)screws and Intermediate hinges have (3) screws.
NOTE: Install lock at this time (sold separately) see instructions in OPTIONAL SIDELOCK INSTALLATION on page 29.
LOCK SECTION
(2) 1/4” - 14 X 5/8” |
| (2) 1/4” - 14 X 5/8” |
| ||
|
|
|
|
|
|
Alignment
stickers
Left end hinge | Right end hinge |
(3)1/4” - 14 X 5/8”
Intermediate hinge
(2) 1/4” - 14 X 5/8”
End hinges (left hand shown, right hinge symmetrically opposite)
(3) 1/4” - 14 X 5/8”
SCREWS
| Intermediate hinges |
|
|
16 | Please Do Not Return This Product To The Store. Contact your local |
To find your