Wayne-Dalton 341785 installation instructions Nylon Center Bushing

17	Nylon Center Bushing
		Center bearing
Tools Needed:	Slide the nylon center bushing into the	bracket	Torsion Spring
			Stationary
	stationary spring cone at the end of the
1/2” Wrench			Spring cone
	spring and align the stationary spring
	cones with the holes in the center
	bearing bracket. Secure the springs to
	the center bearing bracket with
	(2) 3/8”-16 x 1-1/2” hex head bolts	Stationary
	and (2) 3/8”-16 nuts.
		Spring cone
	IMPORTANT: Springs under tension	Torsion
	can be dangerous.
		Spring
	IMPORTANT: The spring warning
	tag(s) supplied must be securely
	attached to the stationary spring		Nylon center
	cone in plain view. Should a
	replacement spring warning tag		bushing
	be required, contact		SPRING
	Wayne-Dalton Corp. for free
			WARNING TAG
	replacements.
		Center bearing
		bracket	(1) 3/8”-16 Nut
		Torsion Spring		(1) 3/8”-16 x 1-1/2”
				hex head bolt
		(1) 3/8”-16 Nut		Torsion Spring
			(1) 3/8”-16 x 1-1/2”
			hex head bolt
24	Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com