|
| |
4 | Installing Fully Adjustable | |
| Jamb Brackets | |
|
| |
Tools Needed: | NOTE: If quick install flagangles were | |
None | installed in Step 3, skip this step and | |
continue with Step 5. If not, complete | ||
| ||
| this step. | |
| The bottom jamb bracket is always the | |
| shortest bracket included with your | |
| door. If three jamb brackets are included | |
| with the door, the middle bracket on the | |
| track is the middle bracket in height. | |
| The top jamb bracket is the tallest | |
| bracket included. | |
| To attach the bottom jamb bracket, | |
| locate the lower hole/slot pattern of | |
| the vertical track. Align the slot in the | |
| jamb bracket with the lower hole of the | |
| hole/slot pattern in the vertical track. | |
| Loosely hand fasten the bracket onto | |
| the track with (1) | |
| bolt and (1) 1/4”- 20 flange hex nut. |
Place the center jamb bracket over the hole/slot pattern that is centered between the bottom jamb bracket and flagangle. Align the slot in the jamb bracket with the lower hole of the hole/slot pattern. Loosely hand fasten the bracket onto the track with
(1)
(1)1/4”- 20 flange hex nut.
Repeat if a third jamb bracket is provided, equally spacing the distance between the two center jamb brackets and the bottom jamb bracket and flagangle.
NOTE: While the bottom jamb bracket is the shortest in length that is included with your door. It does not necessarily mean it is the “short”
fully adjustable jamb brackets
| ||
jamb | hole/slot |
|
pattern |
| |
bracket |
| |
|
| |
|
| (1) |
|
| track bolt |
(1) |
| vertical |
flange |
| |
hex nut |
| track |
jamb bracket |
|
|
vertical track
3rd Set
2nd Set
1st Set
INSTALLATION
Please Do Not Return This Product To The Store. Contact your local | 13 |
To find your