Wayne-Dalton 341785 installation instructions Package Contents

Package Contents

NOTE: Depending on the door model, some parts listed will not be supplied if not necessary. rear supports may or may not be included with your door.

		DOOR SectionS (as required)
		(1) Torsion Tube
(2) Fully Adjustable RH/LH	(2) Quick Install RH/LH	(2) Horizontal Track RH/LH
Flagangle (as required)	Flagangle (as required)

Right & left Drums	Torsion springs	(2) bottom brackets	(1) operator bracket	(2) Top Bracket
	(as required)

Right and left	Q.I. Jamb Brackets	Fully adjustable Jamb	Door stop & nails	weather seal & nails (2) Vertical
coutnerbalance cable	(As Required)	Brackets (As Required)	(if included)	(if included)	Track RH/LH

9800 Series - 3 Section

Low Head Room Front Mount

Torsion Spring

MANUAL	(1) Center Bracket	Right & left	Rollers	(1) Center Bracket	pull rope
		End bearing bracket	(as required)	Bushing	(if included)

(2) 3/8” flat	(2) 5/16” flat	3/8”- 16 Hex Nuts	1/4”- 20 Flanged Hex	1/4” - 20 x 9/16” track	(4) 1/4”-20 x 9/16” large
washers	washers	(As required)	Nuts (as required)	bolts (as required)	head ribbed track bolts

(2) clevis pins 1/4”-14 x 5/8” Self Tapping	(2) 1/4”-20 X 5/8” TAMPER	1/4”-20 X 5/8” self drilling	1/4”-20 x 7/8” Self Drilling
Screws (as required)	RESISTANT SCREWs (as required)	SCREWs (as required)	Screws (as required)

(2) cotter pins	3/8” -16 x 1-1/2” hex head	5/16” x 1 5/8” Hex Head Lag	5/16” x 2” tamper proof lag
	bolts (as required)	Screws (as required)	screws (as required)	3
	Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com