Thermostat Location, Wiring, Operation | White Rodgers 179 specification

THERMOSTAT LOCATION

Proper location of the heavy duty room thermostat is very important to insure acceptable performance. The following general rules will help determine proper location:

1.It is very important to be sure that the thermostat is in an area where air circulates around it freely.

2.Never install the thermostat on or near an outside wall.

3.Do not locate the thermostat near windows or doors, or in any drafty area.

4.Don’t install the thermostat where it will be affected by “false” heat sources (such as direct sunlight, a stove or any appli- ance exhaust, steam lines, etc.).

5.Mount the thermostat on a post or a partioning wall, but be sure that there are no pipes, duct work or heat sources in that wall or directly behind it.

6.If the electrical conduit leads into a cooler or warmer room, plug the hole around the wires with fire-resistant insulation to prevent drafts.

If the thermostat is used with unit heaters, the following sugges- tions for locating the thermostat may be helpful (see fig. 2).

1.Position A in fig. 2 is acceptable if the thermostat is close enough to the unit heater so that the return air to the heater flows over the thermostat.

2.Position B is acceptable if it is not necessary to make frequent adjustments of the dial setting.

Concrete

Plaster/

Drywall

Junction Box

Themostat

Conduit inside wall

Conduit along wall

WALL INSTALLATION

The mounting plate for this thermostat has two holes 35/16”apart for attaching the control on a standard switch box.

Figure 1

Ceiling

Post

		Partition wall
Unit		or post directly
	B	behind unit
	B

3.	Position C is acceptable if it is sufficiently far from the heater	D	C	A
	that air flowing over the thermostat is not much above the			Return Air
	average room temperature.			Return Air
	average room temperature.
4.	Position D is not acceptable because the post may prevent			Floor
	air from circulating over the thermostat.			Floor
	air from circulating over the thermostat.

Figure 2

WIRING

All wiring should be done in accordance with local and national electrical codes and ordinances.

Follow the wiring instructions provided by the heating/cooling equipment manufacturer. If none are offered, a typical circuit application is shown at right.

Fan or Water	Room	Manual
Fan or Water	Thermostat	Switch
Solenoid

R	B	Heating
	W	Cooling
		Line

OPERATION

To set the thermostat, simply move the dial so that the indicating line on the case points to the desired temperature setting on the dial.

Indicating

Line

179 specifications

The White Rodgers 179 is a highly regarded thermostat known for its versatility, reliability, and innovative features. This device caters to homeowners seeking an efficient way to regulate their home’s temperature while enhancing comfort and energy savings. The White Rodgers brand has long been synonymous with quality, and the 179 model is no exception.

One of the prominent features of the White Rodgers 179 is its compatibility with a wide range of heating and cooling systems, including gas, oil, and electric systems. This versatility makes it an attractive option for different households, ensuring that almost any user can benefit from its functionality. The thermostat also supports multi-stage heating and cooling systems, making it suitable for more complex HVAC setups, such as heat pumps with auxiliary heat.

The design of the White Rodgers 179 is user-friendly. Equipped with a clear LCD display, it presents temperature settings and modes in an easily readable format. This simplicity is especially beneficial for those who may not be as tech-savvy, allowing straightforward navigation of the thermostat’s options. The intuitive interface allows users to program their desired temperatures and set schedules to match their lifestyle, enhancing energy efficiency.

One of the standout technologies incorporated within the White Rodgers 179 is its advanced temperature control algorithms. These algorithms enable precise temperature regulation, preventing the common issue of temperature swings that many thermostats are known for. As a result, users experience consistent comfort throughout their living spaces, while also optimizing energy consumption.

Another characteristic of the White Rodgers 179 is its programmable capabilities. Users can set different temperatures for various times of the day and different days of the week, allowing for customized temperature settings when at home or away. This not only enhances comfort but can also lead to significant cost savings on energy bills, as the system can efficiently adjust to when heating or cooling is not needed.

Durability and reliability are vital aspects of any HVAC product, and the White Rodgers 179 excels in these areas. The robust construction of the thermostat ensures it withstands the test of time, providing peace of mind to users with minimal maintenance required.

Ultimately, the White Rodgers 179 combines advanced technology with user-friendly design, making it an excellent choice for those looking to improve their home's climate control. Its compatibility with various systems, programmable features, and precision temperature control make it a standout option for homeowners committed to achieving both comfort and efficiency in their living environment.