Keating Of Chicago 2000 user manual II Installation

Page 4

II INSTALLATION

This unit must be installed, inspected, calibrated and serviced by qualified and/or certified and licensed service personnel - you may void your Keating warranty if installation is not completed per local, national and Keating specifications. Contact your dealer for assistance.

INSTALLATION

Installation must conform with local codes or, in absence of local codes, with the current National Electrical Code ANSI/NFPA 70 or Canadian Electrical Code CAN22.2 as applicable.

DAMAGE DURING

SHIPMENT

The griddle has been assembled, tested and inspected at the factory. Upon arrival, the complete griddle should be checked for any damage that may have occurred during shipment.

The carrier is responsible for all damage in transit whether visible or concealed. Do not pay the freight bill until the griddle has been thoroughly checked for damage. If concealed damage is found later, contact the carrier immediately to file a claim.

What to do if equipment arrives damaged:

VISIBLE LOSS OR DAMAGE -- Be certain to note this on the freight or express receipt and have it signed by the delivery person.

FILE CLAIM FOR DAMAGES IMMEDIATELY -- Regardless of extent of damage.

CONCEALED LOSS OR DAMAGE -- If damage is

LEVELING

Your MIRACLEAN® Griddle will operate at its highest efficiency when properly leveled. Place a level on the griddle plate from side to side. For griddles on legs, the bottom foot of the leg is adjustable. Turn clockwise to decrease height or counterclockwise to increase height until level. For griddles on stands with casters, the casters are adjustable by loosening the jam nut and turning the caster in or out. When the desired level is reached, tighten the jam nut. Adjustments of more than 3/4” are not recommended on any caster. The same procedure should be followed to the level the griddle from front to back.

Figure 2-1

Leveling Griddle

RESTRAINING

for griddle installations on stands with casters, casters and jam nuts must be completely tightened. Adequate means must also be provided to limit the movement of the appliance.

The restraint must be attached to the rear of the griddle as close as possible to the center line width and the bottom of the cabinet back to allow the restraining bolt to be anchored to the cabinet back between the cabinet bottom and inner liner to ensure positive support to restrain griddle movement.

noticed when equipment is unpacked, notify the freight company immediately, and file a “concealed damage claim”. This MUST be done immediately. Be sure to retain the shipping container for inspection.

Keating does not assume responsibility for Loss or Damage incurred in transit.

POSITIONING

WARNING

Do not stand, sit or lean on equipment.

IF DISCONNECTION OF THE RESTRAINT IS NECESSARY, IT MUST BE RECONNECTED WHEN THE MIRACLEAN® GRIDDLE IS RETURNED TO ITS ORIGINALLY INSTALLED POSITION.

The griddle must be placed under an exhaust hood with a fire retardant system. Your ventilation hood, when installed, must conform to the current ANSI/NFPA 96 standard. ALL connections and placement must comply with local and national codes. It is the responsibility of the owner and local installer to comply with these regulations when installing the griddle.

NOTE: NOT FOR OUTDOOR INSTALLATION

ELECTRICAL

CONNECTION

The Keating Electric MIRACLEAN® Griddle is equipped with a three wire terminal block for customer connections. Compare the griddle terminal connections to the appropriate wiring diagram for the griddle (see

2

Image 4
Contents Miraclean Electric Griddle Series Post this Label in a Prominent Location on Your Unit Safety Precautions IntroductionII Installation Wire Size III OperatingConditioning Griddle CookingProduct Load #1 Load #3 Load #2IV Maintenance Cleaning GriddleWarranty Repairs Preventive MaintenanceDisconnect Electric Power Source Before Cleaning CleaningGriddle Surface Trouble shooting Service DiagnosisProblem Probable Cause Solution VI Parts List Ordering PartsControl Panel 208 240 Volt Control Panel 480 VoltQTY Description Number DeepAssembly instructions for griddle stand on casters 208 240 Volt Wiring Diagram 3-PHASE Connections 208 240 Volt Wiring Diagram SINGLE-PHASE Connections Volt Wiring Diagram Viii Keating Griddle Specifications Models Standard & Front Trough only Deep Models42x24 60x2460x30 42x3072x30 60x36 72x36Page Service Information Keating Limited Warranty Card
Related manuals
Manual 22 pages 27.58 Kb

2000 specifications

Keating of Chicago 2000 is a remarkable example of innovation in the realm of high-performance vehicles, combining technology, design, and engineering prowess to create a stunning automobile that stands out. This vehicle is a product of the renowned Keating brand, known for its focus on creating bespoke sports cars that offer thrilling performance while maintaining luxurious comfort.

One of the standout features of the Keating of Chicago 2000 is its powerful engine. It is equipped with a high-performance V8 engine, capable of delivering exceptional horsepower and torque. This engine allows the vehicle to accelerate from 0 to 60 mph in a matter of seconds, showcasing the raw power that enthusiasts crave. The engineering behind the engine includes advanced fuel injection systems and turbocharging, enhancing efficiency and performance.

The chassis of the Keating 2000 is meticulously engineered using lightweight materials such as carbon fiber and aluminum. This contributes not only to the vehicle’s agile handling but also to improved fuel efficiency. The design incorporates a low center of gravity, allowing for enhanced stability during high-speed cornering.

Aerodynamics plays a crucial role in the design of the Keating of Chicago 2000. The body features sleek lines and an aggressive stance, which minimize drag and improve overall handling. Active aerodynamic components, such as adjustable spoilers, further optimize the vehicle’s performance at various speeds, making it suitable for both track days and everyday driving.

Inside, the Keating of Chicago 2000 boasts a luxurious and highly customizable interior. Premium materials such as leather, Alcantara, and bespoke wood finishes create an unparalleled ambiance. The latest technology is integrated seamlessly, including a state-of-the-art infotainment system, advanced navigation, and an audiophile-quality sound system.

Safety features are also a critical aspect of the Keating 2000. Equipped with advanced driver-assistance systems, the vehicle enhances driver confidence and promotes safe driving. Features such as adaptive cruise control, lane-keeping assist, and a comprehensive airbag system underline the brand’s commitment to safety without compromising the exhilarating driving experience.

In conclusion, the Keating of Chicago 2000 sets a benchmark in the luxury sports car segment, exemplifying a blend of performance, technology, and comfort. With its powerful engine, lightweight chassis, aerodynamic design, luxurious interior, and advanced safety features, it offers an unmatched driving experience that appeals to automotive enthusiasts and luxury car aficionados alike.