Desa RCP275, TC275 owner manual Operation, To Start Heater

Page 7

5.Check all connections for leaks. Apply mixture of liquid soap and water to gas joints. Bubbles forming show a leak that must be corrected.

! WARNING

Never use an open flame to check for a leak. Apply a mixture of liquid soap and water to all joints. Bubbles forming show a leak that must be corrected. Correct all leaks at once.

 

6. Close propane supply valve.

OPERATION

 

 

 

! WARNING

Review and understand the warnings in the Safety Informa- tion Section. They are needed to safely operate this heater. Follow all local codes when using this heater.

To Start Heater

1.Follow all installation, ventilation, and safety information.

2.Locate heater on stable and level surface. Make sure strong drafts do not blow on heater.

! WARNING

Fully close main burner valve before lighting pilot. If not, severe burns can occur. Do this by turning valve handle towards the OFF position until it stops.

3.Open propane supply valve on propane tank(s) slowly. Note: If not opened slowly, excess-flow check valve on propane tank will stop gas flow. If this happens, close propane supply valve and open again slowly.

4.Push in and hold automatic control valve button (see Figure 4). Push piezo ignitor button (see Figure 4). You may need to push the piezo ignitor button 3- 8 times until the pilot lights. Note: Hose may be filled with air. If so, keep automatic control valve button pressed and wait 20 seconds before pressing ignitor button again. When pilot lights, keep automatic control valve button pushed in. Release button after 30 seconds.

Main Burner

Valve Handle

Automatic

Piezo Ignitor

Button

Control Valve

 

Button

LP-PFA/OV 006

Gas Controls-TrashCan

Figure 4 - Main Burner Valve Handle, Automatic Control Valve Button, and

Piezo Ignitor Button Locations

Continued

7

 

099156

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Propane Construction Heater Safety Contents SectionSafety Information Operation ProductUnpacking TheorySupply PropaneVentilation Regulator With Vent Pointing Down InstallationTo Start Heater To Stop Heater Storage MaintenanceTo Restart Heater Symptom Possible Cause Remedy Trouble ShootingPublication AccessoriesService Replacement Parts099156 Keep this Warranty Limited Warranty Warranty and Repair Service

RCP275, TC275 specifications

Desa TC275 and RCP275 are remarkable advancements in thermal comfort and energy efficiency, showcasing the latest technologies in heating and cooling systems. Designed for both residential and commercial applications, these models offer innovative features that cater to modern demands for climate control, sustainability, and user-friendly operation.

The Desa TC275 is a powerful, high-efficiency gas-fired heater that provides consistent warmth even in the coldest weather conditions. With its adjustable thermostat, users can easily set their preferred temperature, ensuring optimal comfort at all times. The TC275 incorporates advanced technology that enhances safety, including an automatic shut-off feature and a robust flame-proof safety guard. These elements not only promote peace of mind but also extend the lifespan of the unit.

Meanwhile, the RCP275 model serves as an energy-efficient reverse cycle air conditioning unit, designed to deliver both heating and cooling. This dual functionality makes it a versatile choice for year-round climate control. Equipped with a high Seasonal Energy Efficiency Ratio (SEER), the RCP275 maximizes energy use, translating to lower utility bills. Its inverter technology further optimizes energy consumption by adjusting the compressor speed according to the indoor climate needs.

Both the TC275 and RCP275 boast user-friendly interfaces, enabling seamless operation. The intuitive control systems allow users to program schedules, adjust settings, and monitor performance, all from a central dashboard. Additionally, these units are designed with quiet operation in mind, ensuring that noise does not interfere with daily activities or sleep.

Another key characteristic is the environmentally conscious design. The Desa TC275 employs low-emission technology, which minimizes its carbon footprint, aligning with global trends toward sustainability. Similarly, the RCP275 utilizes eco-friendly refrigerants that contribute to a healthier environment.

In summary, Desa TC275 and RCP275 are exemplary models of modern heating and cooling technologies. Their combination of efficiency, safety, and user-centric features makes them ideal choices for anyone looking to enhance their indoor comfort while being mindful of energy consumption and environmental impact. As these units continue to evolve, they set a benchmark for the future of climate control solutions.
Top Page Image Contents