Empire Comfort Systems VFDR30LB Safety Information for Users of LP-GAS, LP-GAS Warning Odor

Page 4

SAFETY INFORMATION FOR USERS OF LP-GAS

Propane (LP-Gas) is a flammable gas which can cause fires and explosions. In its natural state, propane is odorless and colorless. You may not know all the following safety precau- tions which can protect both you and your family from an accident. Read them carefully now, then review them point

by point with the members of your household. Someday when there may not be a minute to lose, everyone's safety will depend on knowing exactly what to do. If, after reading the following information, you feel you still need more information, please contact your gas supplier.

LP-GAS WARNING ODOR

If a gas leak happens, you should be able to smell the gas because of the odorant put in the LP-Gas.

That's your signal to go into immediate action!

•Do not operate electric switches, light matches, use your phone. Do not do anything that could ignite the gas.

•Get everyone out of the building, vehicle, trailer, or area. Do that IMMEDIATELY.

•Close all gas tank or cylinder supply valves.

•LP-Gas is heavier than air and may settle in low areas such as basements. When you have reason to suspect a gas leak, keep out of basements and other low areas. Stay out until firefighters declare them to be safe.

•Use your neighbor's phone and call a trained LP-Gas service person and the fire department. Even though you may not con- tinue to smell gas, do not turn on the gas again. Do not re-enter the building, vehicle, trailer, or area.

•Finally, let the service man and firefighters check for escaped gas. Have them air out the area before you return. Properly trained LP-Gas service people should repair the leak, then check and relight the gas appliance for you.

NO ODOR DETECTED - ODOR FADE

Some people cannot smell well. Some people cannot smell the odor of the chemical put into the gas. You must find out if you can smell the odorant in propane. Smoking can decrease your ability to smell. Being around an odor for a time can affect your sensitivity or ability to detect that odor. Sometimes other odors in the area mask the gas odor. People may not smell the gas odor or their minds are on something else. Thinking about smelling a gas odor can make it easier to smell.

The odorant in LP-gas is colorless, and it can fade under some circumstances. For example, if there is an underground leak, the movement of the gas through soil can filter the odorant. Odorants

in LP-Gas also are subject to oxidation. This fading can occur if there is rust inside the storage tank or in iron gas pipes.

The odorant in escaped gas can adsorb or absorb onto or into walls, masonry and other materials and fabrics in a room. That will take some of the odorant out of the gas, reducing its odor intensity.

LP-Gas may stratify in a closed area, and the odor intensity could vary at different levels. Since it is heavier than air, there may be more odor at lower levels. Always be sensitive to the slightest gas odor. If you detect any odor, treat it as a serious leak. Immediately go into action as instructed earlier.

SOME POINTS TO REMEMBER

•Learn to recognize the odor of LP-gas. Your local LP-Gas Dealer can give you a "Scratch and Sniff" pamphlet. Use it to find out what the propane odor smells like. If you suspect that your LP-Gas has a weak or abnormal odor, call your LP-Gas Dealer.

•If you are not qualified, do not light pilot lights, perform service, or make adjustments to appliances on the LP-Gas system. If you are qualified, consciously think about the odor of LP-Gas prior to and while lighting pilot lights or performing service or making adjustments.

•Sometimes a basement or a closed-up house has a musty smell that can cover up the LP-Gas odor. Do not try to light pilot lights, perform service, or make adjustments in an area where the conditions are such that you may not detect the odor if there has been a leak of LP-Gas.

•Odor fade, due to oxidation by rust or adsorption on walls of new cylinders and tanks, is possible. Therefore, people should be particularly alert and careful when new tanks or cylinders are placed in service. Odor fade can occur in new tanks, or

reinstalled old tanks, if they are filled and allowed to set too long before refilling. Cylinders and tanks which have been out of service for a time may develop internal rust which will cause odor fade. If such conditions are suspected to exist, a periodic sniff test of the gas is advisable. If you have any question about the gas odor, call your LP-gas dealer. A periodic sniff test of the LP-gas is a good safety measure under any condition.

•If, at any time, you do not smell the LP-Gas odorant and you think you should, assume you have a leak. Then take the same immediate action recommended above for the occasion when you do detect the odorized LP-Gas.

•If you experience a complete "gas out," (the container is under no vapor pressure), turn the tank valve off immediately. If the container valve is left on, the container may draw in some air through openings such as pilot light orifices. If this occurs, some new internal rusting could occur. If the valve is left open, then treat the container as a new tank. Always be sure your container is under vapor pressure by turning it off at the container before it goes completely empty or having it refilled before it is com- pletely empty.

Page 4

21565-3-0906

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Instructions Table of Contents Important Safety Information Carbon Monoxide Poisoning MAY Lead to DeathSafety Information for Users of LP-GAS LP-GAS Warning OdorWell Head Gas Installations AccessoriesProduct Specifications IntroductionsGeneral Information Before you get startedMake sure you have received all parts High AltitudeUnusually Tight Construction ClearancesGlass Doors Installing as a Vented Appliance Sidewall & Ceiling Clearances FigureMantel Clearances Without Hood Figure Mantel Clearances with Hood FigureCombustible Material Fireplace PreparationBefore Fully Installing the Appliance Installing AS a Vented ApplianceInstalling Damper Clamp Figure Installing a New Main Gas Cock Pressure Testing of the Gas Supply SystemGAS Supply Recommended Gas Pipe DiameterVFDR18,24 LOG Placement 5 LOG SET Ember Material Placement on BurnerVFDR30 LOG Placement 7 LOG SET Ember Material Placement on BurnerOperation INSTRUCTIONS/FLAME Appearance Millivolt FigureWiring Check System OperationRemote Receiver Millivolt SystemVFDR18,24,30LB Lighting Instructions What to do if YOU Smell GASPilot Flame Characteristics Correct Pilot Flame Pattern Incorrect Pilot Flame PatternCleaning and Servicing Turn OFF Heater and Allow to Cool Before CleaningGas odor even when control knob is in OFF position Heater produces a whistling noise when main burner is litAppliance produces unwanted odors Appliance shuts off during use. Pilot stays onParts List Index Part Numbers Description VFDR18LB VFDR24LB VFDR30LBHOW to Order Repair Parts Parts ViewService Notes Service Notes

VFDR18LB, VFDR24LB, VFDR30LB specifications

Empire Comfort Systems specializes in high-quality heating solutions, and their VFDR series, which includes the VFDR30LB, VFDR24LB, and VFDR18LB models, showcases the company’s commitment to innovation and efficiency. These vent-free gas log fireplaces are designed to provide warmth and ambiance, making them perfect for any living space.

One of the standout features of the VFDR series is the vent-free design, which allows for easy installation. These fireplaces do not require a chimney or flue, providing flexibility in placement without the need for extensive renovations. This vent-free feature enables the fireplaces to operate efficiently while releasing warmth directly into the room, making them an excellent choice for standing out in compact spaces.

The VFDR models are equipped with advanced technology, including a patented dual burner system. This unique burner design allows for a more realistic flame appearance while maximizing heat output. The result is a mesmerizing fire that enhances the ambiance of any setting. Additionally, the variable flame height control lets users adjust the intensity of the fire, providing customizability according to individual preferences.

When it comes to safety, Empire Comfort Systems has integrated several features in the VFDR series. The fireplaces include an Oxygen Depletion Sensor (ODS), which automatically turns off the burner if the oxygen levels in the room drop too low, ensuring peace of mind while using the appliance. Furthermore, the appliances are built with a safety pilot light, reinforcing their reliability and user safety.

Each model in the VFDR series comes with different heat output capabilities. The VFDR30LB provides up to 30,000 BTUs, making it suitable for larger spaces, while the VFDR24LB and VFDR18LB cater to medium and smaller areas with outputs of 24,000 and 18,000 BTUs, respectively. This versatility allows homeowners to select the perfect model based on their heating needs.

The VFDR series is also visually appealing, featuring a realistic log set and a stylish finish that complements a variety of interior designs. With a wide range of decorative options available, consumers can customize their fireplace to enhance their home’s aesthetic.

In summary, the Empire Comfort Systems VFDR30LB, VFDR24LB, and VFDR18LB models are an exceptional choice for anyone seeking a reliable, efficient, and stylish heating solution. Their vent-free design, innovative burner system, safety features, and aesthetic appeal make them standouts in the market. Whether for a cozy living room or an inviting den, these fireplaces provide the perfect combination of functionality and warmth.
Top Page Image Contents