ASSEMBLY
1.Lift the water tank off the central body.
2.Turn over the water tank and unscrew the water tank cap at the bottom of the tank by turning it counterclockwise. (See Fig. 6)
3.Fill water tank with cold water; do not fill all the way to the rim. DO NOT CARRY FULL WATER TANK BY HANDLE. ALWAYS HOLD FULL WATER TANK WITH TWO HANDS ON EITHER SIDE OF WATER TANK.
(See Fig. 7)
Note: To avoid possible white dust due to hard water it is recommended to use filtered or distilled water.
DO NOT use hot water. Use cool tap water.
DO NOT add any medication to other additives to the water
DO NOT pour water into Vapor Outlet Channel (part 6, Fig.2 on page 4)
4.Replace the water tank cap, aligning the threads on the tank with the threads on the cap, and turn it clockwise.
(See Fig. 8)
5.Turn the tank over, holding one hand by the top handle and another hand under tank. Place full water tank on the central body, making sure it fits perfectly. Place the water tank lid with output slot on top of the water tank.
(see Fig. 9)
Fig. 6
Fig. 7
Fig. 8
Fig. 9
6.Plug the power cord into a wall socket and turn on the unit. The On/Off switch is located at the central body. (see figure 1).
6