Important Safeguards, Introduction, Casters

IMPORTANT SAFEGUARDS

READ BEFORE USING YOUR HUMIDIFIER

1)This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized 120-volt AC, 15 amp outlet, and only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. If an extension cord must be used, it should also accept the wide blade plug and meet this electrical rating.

2)Do not place the cord under rugs, near loose drapes, in traffic areas, nor near heat sources or combustible materials.

3)Do not use the humidifier if the cord is damaged.

4)Always unplug the power cord before filling, cleaning, servicing, or when the unit is not in use.

5)This humidifier is UL listed with Essick Air brand evaporative wicks in place. To maintain your UL rating, see your service center for all repairs.

6)Regular cleaning is recommended. Refer to the CARE & MAINTENANCE section in the manual.

INTRODUCTION

Your Essick Air evaporative humidifier adds invisible moisture to your home by moving dry inlet air through a saturated wick. As air moves through the wick, the water evaporates into the air, leaving behind any white dust, minerals, or dissolved and suspended solids. Because the water is evaporated, there is just clean and invisible moist air.

As the evaporative wick traps accumulated minerals from the water, its ability to absorb and evaporate water decreases. We recommend changing the wick at the beginning of every season. In hard water areas, more frequent replacement may be necessary to maintain your humidifier’s efficiency.

Use only Essick Air brand replacement wicks and chemicals. To order parts, wicks and chemicals call 1-800-547-3888. The 800 Series humidifiers use Essick Air wick # 1043. Only the Essick Air evaporative wick guarantees the certified output of your humidifier. Use of wicks other than Essick Air brand will void your warranty as well as the certification of output and may reduce the output of your humidifier.

Dry air is drawn into the humidifier through the back and moisturized as it passes through the evaporative wick. It is then fanned out into the room.

1)Water reservoir

2)Chassis (motor and fan assembly)

3)Evaporative wick

4)Water reservoir

5)Dry air intake

6)Moist air output

CAUTION: Do NOT position the unit directly in front of a hot air duct or radiator. Do NOT place on soft carpet.

ASSEMBLY, CONTROLS & OPERATION

1)Unpack humidifier from carton.

2)Remove all packaging materials. Check to see that you have all of the following items removed from the boxes accessory kit and cabinet before discarding the packaging:

a.Caster kit

b.Evaporative wick

c.Lift rod assembly with Styrofoam float

CASTERS

3)Turn the emptied cabinet upside down. Insert each caster stem into the four caster holes on each corner of the humidifier bottom. The casters should fit snugly and be inserted until the stem shoulder reaches the cabinet surface. Do not force.

4)Turn the cabinet right side up.

EVAPORATIVE WICK

5)Replace the float assembly and attached lift rod into the boxed area on the bottom of the inside of the cabinet. Slip lift rod into retainer ring and twist to secure. The lift rod should be able to freely move up and down about 3/8”. The retainer ring should be located between the two ribs on the lift rod.

6)Place the wick assembly back into the guides provided in the bottom of the cabinet and the ribs along the sides.

7)Place the chassis unit onto the cabinet ensuring that the chassis seats correctly into the front and back grooved edges.

IMPORTANT FILLING INFORMATION

8)Before filling the humidifier with water, be certain that the speed control switch is turned off and the humidifier is unplugged. Fill the water reservoir with water to the level indicated on the wick frame assembly and “Fill to Here” decal on the cabinet side wall. Do not overfill. When first filled, the reservoir capacity is 6 gallons.

9)Your humidifier is equipped with one reservoir. When the reservoir has emptied, the humidifier fan

826 800, 821 000, 821 001 specifications

The Chemex coffee maker is a timeless brewing device known for its elegant design and exceptional performance. Among the models in the Chemex lineup, the Chemex 821 001, 821 000, and 826 800 stand out due to their unique features and technologies.

The Chemex 821 001 is a classic model distinguished by its hourglass shape and glass construction. This model typically holds up to 8 cups of coffee, making it an excellent choice for both individual servings and gatherings. One of its main features is the patented Chemex filter, which is thicker than standard filters. This design allows for a cleaner extraction by effectively removing impurities and oils from the coffee, resulting in a crisp and flavorful cup. The non-porous surface of the glass also ensures that no residual odors or flavors alter the taste of the coffee.

The Chemex 821 000, on the other hand, is a slightly larger version, designed to brew up to 10 cups. Like the 821 001, it features the iconic hourglass shape and is built from high-quality glass. This model is particularly suited for coffee enthusiasts who often brew for small gatherings or family. Its design maintains the ability to deliver the same clarity and bright notes in coffee, adhering to Chemex’s commitment to high-quality brewing. The wooden collar provides a protective grip, ensuring safe handling even when brewing hot coffee.

The Chemex 826 800 is a modern variant that incorporates a unique handle design for improved functionality. This model retains the classic Chemex aesthetics while providing an ergonomically comfortable grip. It maintains the same brewing capacity as the 821 000, offering versatility with every brew. The wooden collar not only serves as a functional aspect but also enhances the visual appeal of this model, making it a stylish addition to any kitchen.

All three models utilize a pour-over brewing technique, which allows the user to have complete control over the brewing process. The Chemex coffee makers are free from plastic, thus guaranteeing that no chemical interference takes place during the brewing process. As a result, the coffee produced retains its pure flavors and aromatic properties, making the Chemex an ideal choice for coffee connoisseurs seeking a delightful and refined coffee experience. With their emphasis on quality, elegance, and simplicity, the Chemex 821 001, 821 000, and 826 800 models continue to hold a revered place in the coffee brewing world.