Arizona MAX-5000XL user manual Lithium Coin Cell Battery

Page 5

1. WARNINGS AND SAFETY INFORMATION

The MAX 5000XL moisture analyzer complies with the Underwriter Laboratories Inc. standards and European Council Directives, for Electrical Equipment for Laboratory Use, electromagnetic

compatibility, and the stipulated safety requirements. However, improper use or handling of the instrument can result in damage to the equipment and/or injury to personnel.

The MAX 5000XL is Equipment Class I, Pollution Degree 2, and Installation Category II.

Read these operating instructions thoroughly before using your moisture analyzer to prevent damage to the equipment. Keep these instructions in a safe place.

The following instructions will help to ensure safe and trouble-free operation of your MAX 5000XL.

∙Use the analyzer only for performing moisture/solids/ashing analysis of samples. Any improper use of the analyzer can endanger persons and may result in damage to the analyzer or other material assets.

∙Place analyzer in an appropriate fume hood for ashing and/or burning a sample.

∙When ashing and/or burning a sample, use the ash rate to slow ignition and prevent flaming. If the sample flames, it will damage the heater and produce poor test results.

∙Do not use this analyzer in a hazardous area/location; operate it only under the ambient conditions specified in these instructions.

∙Although the analyzer is simple to operate and is very user friendly, it should only be operated by qualified persons who are familiar with the properties of the sample being analyzed.

∙Ensure, before getting started, that the voltage rating printed on the manufacturer's label is identical to your local line voltage (see the section on AC Power Connection beginning on page 14).

∙The MAX 5000XL is provided with a power cord that has a protective grounding conductor. Do not operate the unit without the supplied three-wire power cord or an identical recognized equivalent that meets all applicable standards.

∙AZI does not recommend the use of an extension cord. However, if one must be used, use an extension cord that meets all applicable standards and has a protective grounding conductor.

∙Do not remove the protective grounding wire from the power supply circuit

∙With the power switch off, power is still applied to the power entry module. Remove the power cord from the MAX 5000XL to ensure complete power removal from the instrument.

∙Position the power cable so that it cannot touch any hot areas of the analyzer.

∙Use only AZI supplied accessories and options with the MAX 5000XL or check with AZI before using any third party accessories, such as printers and analytical balances, to verify compatibility.

∙If there is visible damage to the MAX 5000XL or its power cord, unplug and isolate the unit first and then call Customer Service at 800-528-7411 or 602-470-1414.

∙Do not open the housing of the MAX 5000XL. There are no user serviceable parts or adjustments inside the unit. Any maintenance inside the unit is to be performed by

factory-trained technicians only. Any unauthorized inspection and/or maintenance of the MAX 5000XL will make the warranty null and void.

Lithium Coin Cell Battery

The MAX 5000XL contains a lithium battery to keep power on the clock when the unit is turned off.

CAUTION – The battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

Prevent excess heat build-up around the analyzer

When setting up the analyzer, leave enough space to prevent heat from building up and to keep your analyzer from overheating. Leave 20 cm (about 8 in.) around the analyzer and 1 m (about 3 ft.) above the unit.

Do not put any flammable substances on, under or near the analyzer, because the area around the unit will heat up, especially during the self-cleaning cycle.

Use extreme care when removing the sample from the chamber. Although the ceramic heating chamber cools rapidly, the sample itself, the sample pan, and the heating element can still be extremely hot.

AZI Customer Service 800-528-7411 or 602-470-1414

Page 5 of 92

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MAX 5000XL Computrac MAX 5000XL Table of Contents Sample PREPARATION, Testing and Analysis Lithium Coin Cell Battery Environmental Conditions Unpacking Packing and Shipping InstructionsRemove the PAN Support and Pack Separately Ash % Instrument DescriptionTypical Moisture Level % Repeatability Hardware MAX 5000XL is designed to remain powered up at all timesPart Name AZI Part Number InventoryInstrument Setup Interior of Test Chamber To ensure the entry module is set for the correct voltage AC Power Connection The Up and Down Arrow Keys move the cursor Connecting a Printer Contrast AdjustmentAZI Customer Service 800-528-7411 or AZI Customer Service 800-528-7411 or Connecting the External Filter Kit Connecting a ComputerMenu Calibrate the Balance 50 gram weightPlease Wait Weight Test Memory Starts Menu Main MenuSample Name Editing Test ParametersTemperatures Ending Criteria AZI Customer Service 800-528-7411 or AZI Customer Service 800-528-7411 or Sample Size Options Moisture Tare OptionsAZI Customer Service 800-528-7411 or Low Moisture CF Result Display OptionsLinked Test Options Use This Test Weight For Total Calculations? Copy Memory Start CUT Memory Start∙ Press Copy Insert Memory StartPrint Memory Start Analyze Stored Data Stored Data MenuSelect All Data AnalyzePrint Stored Data View Stored DataCalibrate Balance Calibration MenuBalance Calibration View Calibration Report Calibration Reminder SetupHigh Temperature Lift Calibration Calibration Module Setup Temperature CalibrationVerification Setup Perform Verification Perform CalibrationView Cal Report Calibration Reminder Setup Temperature Calibration Temperature Calibration Instructions∙ Open the lid and wait for it to cool Cleaning Reminder Setup Oven CleaningPrinter Setup Setup MenuReport Control Options Report SetupAdd/Edit Company Name Date/Time SetupReport Items to Print Lot Number Data Format SetupEC Display Ethernet Setup Access Key SetupMaster Key Calibration KeyObtain IP Address Name and PasswordEnter Foils Special FeaturesSample Foils AZI Customer Service 800-528-7411 or Develop From Scratch Parameter Expert Optional FeatureAZI Customer Service 800-528-7411 or AZI Customer Service 800-528-7411 or AZI Customer Service 800-528-7411 or Optimize Temp/Speed/Repeatability AZI Customer Service 800-528-7411 or Balance Temperature Stability Sample PREPARATION, Testing and AnalysisPreparing Granular and Powdery Samples Preparing and Testing Liquid SamplesIntroduction Performance EnhancementSelecting the Optimum Sample Size AZI Customer Service 800-528-7411 or Determining Proper Test Temperature Selection of Ending Criteria Performance Verification Stored Data Menu Precision Weight TestSodium Tartrate Test Precision Sodium Tartrate Test Retained Samples Calibration Report WEB ServerMemory Starts LCD ViewTest Results Chamber Interior Routine MaintenanceInsulator Seal Shroud GasketOven Self Cleaning Oven Chamber CleaningExternal Filter Cleaning Oven Vent CleaningSample Pan Support Lithium Battery ReplacementTrouble Diagnosis Symptom Diagnosis RemedyAZI Customer Service 800-528-7411 or Balance Consumables Accessories & Maintenance PartsFeature Specification MAX 5000XL SpecificationsLOI AZI Customer Service 800-528-7411 or Changes Warranty Trademark and Copyright Protection

MAX-5000XL specifications

The Arizona MAX-5000XL is a premier flatbed printer designed for high-volume printing applications, renowned for its versatility and cutting-edge technology. This remarkable machine is part of the Arizona series from Océ, a brand recognized for its innovation in digital printing solutions. The MAX-5000XL is specifically engineered to deliver high-quality graphics across various substrates, making it a favorite among businesses in signage, graphics, and packaging industries.

One of the standout features of the MAX-5000XL is its expansive printing capacity. With a maximum bed size of 126 x 98 inches, it can accommodate large sheets, enabling the production of oversized prints without the need for cumbersome tiling or trimming. This feature not only saves time but also enhances operational efficiency, allowing businesses to streamline their workflow.

The MAX-5000XL employs advanced UV printing technology, which uses ultraviolet light to cure the ink instantly as it is printed. This results in vibrant colors, sharp details, and improved durability, making prints resistant to scratches, chemicals, and UV exposure. The printer’s ink system features highly pigmented inks that produce stunning images, offering a wide color gamut that is perfect for demanding graphical applications.

Moreover, the printer is equipped with a sophisticated high-resolution imaging system that delivers outstanding print quality at resolutions up to 1440 dpi. This level of detail ensures that even the finest elements of a design are replicated with precision. The machine also incorporates a variable dot technology that optimizes ink droplet size based on the image content, further enhancing the overall image quality.

Another notable characteristic of the Arizona MAX-5000XL is its user-friendly interface. The printer features intuitive software that simplifies setup, operation, and maintenance, enabling operators to focus more on production rather than troubleshooting. The machine also supports automated printing features, reducing manual intervention and helping to improve turnaround times.

In addition, the MAX-5000XL is designed with sustainability in mind. Its low-energy LED UV curing technology not only reduces energy consumption but also minimizes the environmental impact of the printing process. The ability to print on a wide range of substrates, including rigid and flexible materials, also expands the creative possibilities for designers while offering greater options for businesses looking to cater to diverse markets.

In summary, the Arizona MAX-5000XL is a state-of-the-art flatbed printer that combines large-format capabilities, exceptional print quality, and advanced technology. Its user-friendly features and emphasis on sustainability make it an ideal choice for businesses seeking to elevate their printing operations to new heights.
Top Page Image Contents