▶Wake Up Event Setup
Press <Enter> to enter the
Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS.
▶Resume By RTC Alarm
The field is used to enable or disable the feature of booting up the system on a scheduled time/date.
▶Date/ HH:MM:SS
If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields (using the <+> and
▶Resume By PCI or 
When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCI/ PCIe device.
▶Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Sus- pend to RAM) sleep state.
▶Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from what power saving modes when input signal of the PS/2 mouse/ keyboard is detected.
Boot▶Full
Screen Logo Display
[Enabled] The OS boots straight to the GUI without showing the POST screen, [Disabled] Shows the POST messages at boot.
▶Other PCI device ROM priority
This item is used to specify the PCI device ROM priority. == Boot Option Priorities==
▶1st~9th Boot
These items are used to prioritize the installed boot devices.
▶USB KEY Drive BBS Priorities & CD/DVD ROM Drive BBS Priorities & UEFI Boot Drive BBS Priorities
▶1st~8th Boot
These items are used to prioritize the installed USB key drives & CD/DVD ROM & UEFI boot drives.
2 Chapter