•
•Automatic detector sensitivity testing.
•Maintenance alert (two levels).
•
VIEW® (VERY INTELLIGENT EARLY WARNING) SMOKE DETECTION TECHNOLOGY:
•Revolutionary spot laser design.
•Advanced AWACS algorithms differentiate between smoke and
•Addressable operation pinpoints the fire location.
•No moving parts to fail or filters to change.
•Early warning performance comparable to the best aspiration systems at a fraction of the lifetime cost.
ACCLIMATE
LOW-PROFILE INTELLIGENT MULTI-SENSOR:
•Detector automatically adjusts sensitivity levels without oper- ator intervention or programming. Sensitivity increases with heat.
•
•FlashScan® or classic mode compatible with
•
RFX WIRELESS INTERFACE SYSTEM:
•Allows protection in areas where the use of wire is uneco- nomical or unpractical.
•Allows communication with wireless smoke detectors and wireless monitor modules; each RFX unit and detector is assigned an address.
•Requires 24 VDC from SLC or system auxiliary power.
HARSH™ HOSTILE-AREA SMOKE HEAD:
•Provides early warning of smoke detection in environment where traditional smoke detectors are not practical.
•The detector's filters remove particulates down to 30 microns in size.
•Intake fan draws air into photo chamber, while airborne parti- cles and water mist are removed.
•Requires auxiliary 24 VDC from system or remote power supply.
RELEASING FEATURES:
•Ten independent hazards.
•Sophisticated
•Delay timer and Discharge timers (adjustable).
•Abort (four options).
•
VOICE AND TELEPHONE FEATURES:
•Solid state message generation.
•
•Firefighter telephone option.
•30- to
•Backup tone generator and amplifier option.
•Multichannel voice transponder (XPIQ).
3.0 AMP POWER SUPPLY (6.0 A IN ALARM):
•120 or 220/240 VAC.
•Displays battery current/voltage on panel (with display).
Sample |
System |
Options |
Page 2 of 9 — |