Kidde RF-SND manual Good Safety Habits, Develop and Practice a Plan of Escape

Page 8

CLEANING YOUR SMOKE SOUNDER

YOUR SMOKE SOUNDER SHOULD BE CLEANED AT LEAST ONCE A YEAR

To clean your Smoke Sounder, disconnect it from the outlet and wipe the outside of the Smoke Sounder with a damp cloth. After cleaning, reinstall your unit, verify the green LED is on and test your Smoke Sounder by using the test button.

7. GOOD SAFETY HABITS

DEVELOP AND PRACTICE A PLAN OF ESCAPE

Install and maintain fire extinguishers on every level of the home and in the kitchen, basement and garage. Know how to use a fire extinguisher prior to an emergency.

Make a floor plan indicating all doors and windows and at least two (2) escape routes from each room. Second story windows may need a rope or chain ladder.

Have a family meeting and discuss your escape plan, showing everyone what to do in case of fire.

Determine a place outside your home where you all can meet if a fire occurs.

Familiarize everyone with the sound of the smoke alarm and train them to leave your home when they hear it.

Practice a fire drill at least every six months, including fire drills at night when family members are asleep to see who responds. If someone doesn’t wake up, assign an adult to wake and assist that individual in the event of a fire. Kidde recommends that parents plan on alerting and assisting children. Practice allows all occupants to test your plan before an emergency. It is important they know what to do.

WHAT TO DO WHEN THE ALARM SOUNDS

Leave immediately by your escape plan. Families have on average less than three minutes to escape a fire, so don’t waste time getting dressed or picking up valuables.

In leaving, don’t open any inside door without first feeling its surface. If hot, or if you see smoke seeping through cracks, don’t open that door! Instead, use your alternate exit. If the inside of the door is cool, place your shoulder against it, open it slightly and be ready to slam it shut if heat and smoke rush in.

Stay close to the floor if the air is smoky. Breathe shallowly through a cloth, wet if possi- ble.

Once outside, go to your selected meeting place and make sure everyone is there.

Call the fire department from your neighbor’s home - not from yours!

Don’t return to your home until the fire officials say that it is all right to do so.

There are situations where a smoke alarm may not be effective to protect against fire as stated in the NFPA Standard 72. For instance:

a)smoking in bed

b)leaving children home alone

c)cleaning with flammable liquids, such as gasoline

Image 8
Contents Smoke Sounder User’s Guide Contents of this USER’S Guide Installation InstructionsRecommended Locations for Smoke Sounders Locations to AvoidBattery Installation Wiring RequirementsMounting Instructions Operation and Testing LED Indicator Operation Red LEDOperation Green LEDNuisance Alarms MaintenanceBattery Installation and Removal Battery ReplacementDevelop and Practice a Plan of Escape Good Safety HabitsWhat to do When the Alarm Sounds Trouble Shooting Guide Problem Possible cause SolutionService and Warranty FCC Compliance StatementFive Year Limited Warranty

RF-SND specifications

The Kidde RF-SND is a sophisticated combination smoke and carbon monoxide (CO) alarm that integrates advanced features and technologies to enhance home safety. As a vital addition to household safety systems, it employs cutting-edge sensing technologies designed to provide reliable protection against both smoke and harmful carbon monoxide emissions.

One of the standout features of the Kidde RF-SND is its dual-sensor capability. The alarm utilizes a photoelectric sensor to detect smoke from slow-burning fires, such as those caused by smoldering furniture, while its ionization sensor efficiently responds to fast-burning fires, such as those generated by paper and flammable liquids. This dual approach significantly improves the alarm’s ability to accurately identify different fire types and reduces the likelihood of false alarms, ensuring that users receive timely alerts when it matters most.

The RF-SND also incorporates a high-performance carbon monoxide sensor, which continuously monitors CO levels in the home. This feature is crucial, as carbon monoxide is a colorless, odorless gas that can be deadly in high concentrations. The RF-SND activates when CO levels surpass a predetermined threshold, giving inhabitants essential time to react and evacuate.

A notable characteristic of the Kidde RF-SND is its wireless interconnectivity feature, which allows multiple alarms to communicate with each other. When one unit detects smoke or CO, all interconnected alarms sound, providing an early warning throughout the house. This is particularly beneficial for larger homes, as it ensures that alerts are heard regardless of where they originate.

Powering the Kidde RF-SND is an easy-to-change battery system, ensuring continuous operation without the hassle of hardwiring. Additionally, the unit is equipped with a voice alarm feature that announces the type of danger detected, whether it’s smoke or carbon monoxide, allowing homeowners to make informed decisions during emergencies.

The Kidde RF-SND model is also designed with user-friendly installation in mind. Its compact, modern design fits seamlessly into any home decor, and included installation materials make setup straightforward. Users can easily test and silence the alarm with a single button, further enhancing the overall convenience.

In summary, the Kidde RF-SND combines advanced sensing technologies, wireless interconnectivity, and user-centric features, making it a comprehensive solution for fire and carbon monoxide safety in homes. Its ability to provide critical alerts and protect lives is paramount, solidifying its place as a trusted device in residential safety.