HOW to Install this Smoke Alarm, Battery here

HOW TO INSTALL THIS SMOKE ALARM

THE PARTS OF THIS SMOKE ALARM

		1		1.	“OPEN HERE” tab
				1.	“OPEN HERE” tab
1.	“OPEN HERE” tab			2.	Test button, power/alarm
2.	Cover hinge				indicator
2.	Cover hinge	3		3.	Silence button
3.	Test button,	3	2	3.	Silence button
3.	Test button,			4.	Smoke Alarm base
	power/alarm indicator			4.	Smoke Alarm base
4.	Silence button	4	5	5.	Mounting slots
				6.	DO NOT install any
					battery here!
		5		7.	Install 9V battery here
		5
		6	7

FOLLOW THESE SIMPLE STEPS!

This unit is designed to be mounted on the ceiling, or on the wall if necessary.

Tools you will need:

•Pencil

•Drill with 3/16” (5 mm) drill bit

•Standard/Flathead screwdriver

•Hammer

1.Hold base firmly and pull up on cover tab marked “OPEN HERE.” This will open the hinged cover. The cover may unsnap from the base if it's opened too far. This will not damage the unit—the cover hinge snaps back into place easily.

2.Hold the Smoke Alarm base against the ceiling (or wall) and make a mark at the center of each of the mounting slots with a pencil.

3.Put the unit where it won’t get covered with dust when you drill the mounting holes.

4.Using a 3/16” (5 mm) drill bit, drill a hole through each pencil mark.

5.Insert the plastic screw anchors (in the plastic bag with screws) into the holes. Tap the screw anchors gently with a ham- mer, if necessary, until they are flush with the ceiling or wall.

6.Tighten the screws (provided) into the screw anchors, then loosen them two turns.

7.Fit the Smoke Alarm over the screw heads as shown. Close cover.

8.If the Smoke Alarm cover does not line up the way you want it, rotate the base and re-tighten the screws.

9.Activate the battery. With the cover open, remove and reinstall the battery so the ter- minals on the battery match the terminals on the Smoke Alarm. Match “+” to “+” and “-” to “-.” Push the battery in until it snaps in securely and cannot be shaken loose.

If the battery is not snapped in completely, the unit cannot receive battery power. The Smoke Alarm may beep briefly when you install the battery—this is normal.

Once the battery is installed, the power indicator light (behind the test button) will flash once a minute to show you the Smoke Alarm is working.

10.Close the cover all the way.

11.Test the Smoke Alarm. See “Weekly Testing.”

SA87CN, SA97CN specifications

The First Alert SA87CN and SA97CN are sophisticated smoke and carbon monoxide detectors that provide essential safety features for homes and businesses. Both models are designed to offer advanced protection against life-threatening hazards, employing the latest technologies to ensure user safety.

One of the standout features of the SA87CN and SA97CN is their ability to detect both smoke and carbon monoxide. This dual detection capability ensures comprehensive safety, as carbon monoxide is a colorless, odorless gas that can be particularly dangerous. The units utilize an electrochemical sensor for carbon monoxide detection alongside a photoelectric smoke sensor. This combination allows for quicker response times to various types of fires, particularly slow-smoldering fires that can produce significant amounts of smoke without a raging flame.

Another significant characteristic of these models is their voice alarm feature, which provides a verbal warning, clearly announcing the specific danger detected. This feature is crucial in emergencies, as it helps occupants quickly identify whether they are facing smoke or carbon monoxide, allowing them to make informed decisions about evacuation.

Ease of installation and use is another hallmark of the SA87CN and SA97CN. These detectors can be easily mounted on walls or ceilings, and their user-friendly design ensures that testing, maintenance, and battery replacements are straightforward. The units are equipped with a low battery indicator, alerting users when it's time to replace the battery, which is essential for maintaining reliable operation.

Additionally, both models feature a silence button, allowing users to temporarily silence non-threatening alarms caused by cooking smoke or other benign sources. This is especially useful in households with children or elderly individuals, as it minimizes the chances of causing panic during normal activities.

In summary, the First Alert SA87CN and SA97CN smoke and carbon monoxide detectors exemplify top-tier safety technology. With dual detection capabilities, voice alarms, simple installation, and user-friendly features, these devices are invaluable tools for ensuring the safety and well-being of inhabitants. Their combination of advanced technologies and practical characteristics makes them a reliable choice for protecting against fire and carbon monoxide hazards.