First Alert SA97CN, SA87CN Special Compliance Considerations, Limitations of Smoke Alarms

Page 6

SPECIAL COMPLIANCE CONSIDERATIONS

This Smoke Alarm alone is not a suitable substitute for complete fire detection systems in places housing many people—like apartment buildings, condominiums, hotels, motels, dormitories, hospitals, long- term health care facilities, nursing homes, day care facilities, or group homes of any kind—even if they were once single-family homes. It is not a suitable substitute for complete fire detection systems in warehouses, industrial facilities, commercial buildings, and special-purpose non-resi- dential buildings which require special fire detection and alarm systems. Depending on the building codes in your area, this Smoke Alarm may be used to provide additional protection in these facilities.

The following information applies to all four building types below:

In new construction, most building codes require the use of AC or AC/DC powered Smoke Alarms only. In existing construction, AC, AC/DC, or DC powered Smoke Alarms can be used as specified by local building codes. Refer to NFPA 101 (Life Safety Code) or NFPA 72 (National Fire Alarm Code), local building codes, or consult your Fire Department for detailed fire protection requirements in buildings not defined as “households.”

1. Single-Family Residence:

Single family home, townhouse. It is recommended Smoke Alarms be installed on every level of the home, in every bedroom, and in each bed- room hallway.

2. Multi-Family or Mixed Occupant Residence:

Apartment building, condominium. This Smoke Alarm is suitable for use in individual apartments or condos, provided a primary fire detection system already exists to meet fire detection requirements in common areas like lobbies, hallways, or porches. Using this Smoke Alarm in common areas may not provide sufficient warning to all residents or meet local fire protection ordinances/regulations.

3. Institutions:

Hospitals, day care facilities, long-term health care facilities. This Smoke Alarm is suitable for use in individual patient sleeping/resident rooms, provided a primary fire detection system already exists to meet fire detection requirements in common areas like lobbies, hallways, or porches. Using this Smoke Alarm in common areas may not provide sufficient warning to all residents or meet local fire protection ordi- nances/regulations.

4. Hotels and Motels:

Also boarding houses and dormitories. This Smoke Alarm is suitable for use inside individual sleeping/resident rooms, provided a primary fire detection system already exists to meet fire detection requirements in common areas like lobbies, hallways, or porches. Using this Smoke Alarm in common areas may not provide sufficient warning to all resi- dents or meet local fire protection ordinances/regulations.

First Alert® is a registered trademark of the First Alert Trust.

Printed in Mexico M08-0020-002 J1 07/04

LIMITATIONS OF SMOKE ALARMS

Smoke Alarms have played a key role in reducing deaths resulting from home fires worldwide. However, like any warning device, Smoke Alarms can only work if they are properly located, installed, and maintained, and if smoke reaches them. They are not foolproof.

Smoke alarms may not waken all individuals. Practice the escape plan at least twice a year, making sure that everyone is involved – from kids to grandparents. Allow children to master fire escape planning and practice before holding a fire drill at night when they are sleeping. If children or others do not readily waken to the sound of the Smoke Alarm, or if there are infants or family members with mobility limitations, make sure that someone is assigned to assist them in fire drill and in the event of an emergency. It is recommended that you hold a fire drill while family members are sleeping in order to determine their response to the sound of the Smoke Alarm while sleeping and to determine whether they may need assistance in the event of an emergency.

Smoke Alarms cannot work without power. Battery operated units cannot work if the batteries are missing, disconnected or dead, if the wrong type of batteries are used, or if the batteries are not installed cor- rectly. AC units cannot work if the AC power is cut off for any reason (open fuse or circuit breaker, failure along a power line or at a power sta- tion, electrical fire that burns the electrical wires, etc.). If you are con- cerned about the limitations of battery or AC power, install both types of units.

Smoke Alarms cannot detect fires if the smoke does not reach them. Smoke from fires in chimneys or walls, on roofs, or on the other side of closed doors may not reach the sensing chamber and set off the alarm. That is why one unit should be installed inside each bedroom or sleeping area—especially if bedroom or sleeping area doors are closed at night—and in the hallway between them.

Smoke Alarms may not detect fire on another floor or area of the home. For example, a stand-alone unit on the second floor may not detect smoke from a basement fire until the fire spreads. This may not give you enough time to escape safely. That is why recommended mini- mum protection is at least one unit in every sleeping area, and every bedroom on every level of your home. Even with a unit on every floor, stand-alone units may not provide as much protection as interconnect- ed units, especially if the fire starts in a remote area. Some safety experts recommend installing interconnected AC powered units with battery back-up (see “About Smoke Alarms”) or professional fire detec- tion systems, so if one unit senses smoke, all units alarm. Interconnected units may provide earlier warning than stand-alone units since all units alarm when one detects smoke.

Smoke Alarms may not be heard. Though the alarm horn in this unit meets or exceeds current standards, it may not be heard if: 1) the unit is located outside a closed or partially closed door, 2) residents recently consumed alcohol or drugs, 3) the alarm is drowned out by noise from stereo, TV, traffic, air conditioner or other appliances, 4) residents are hearing impaired or sound sleepers. Special purpose units, like those with visual and audible alarms, should be installed for hearing impaired residents.

Smoke Alarms may not have time to alarm before the fire itself causes damage, injury, or death, since smoke from some fires may not reach the unit immediately. Examples of this include persons smoking in bed, children playing with matches, or fires caused by violent explosions resulting from escaping gas.

Smoke Alarms are not foolproof. Like any electronic device, Smoke Alarms are made of components that can wear out or fail at any time. You must test the unit weekly to ensure your continued protection.

Smoke Alarms cannot prevent or extinguish fires. They are not a substi- tute for property or life insurance.

Smoke Alarms have a limited life. The unit should be replaced imme- diately if it is not operating properly. You should always replace a Smoke Alarm after 10 years from date of purchase. Write the purchase date on the space provided on back of unit.

6

Image 6
Contents Before YOU Install this Smoke Alarm Table of ContentsFire Safety Tips USER’S ManualDo not install any HOW to Install this Smoke AlarmParts of this Smoke Alarm Battery hereWeekly Testing Regular MaintenanceIf this Smoke Alarm Sounds If YOU Suspect a Problem Limited WarrantyInstalling Smoke Alarms in Mobile Homes & RVS Locations to Avoid for Smoke AlarmsAbout Smoke Alarms Agency Placement RecommendationsLimitations of Smoke Alarms Special Compliance Considerations

SA87CN, SA97CN specifications

The First Alert SA87CN and SA97CN are sophisticated smoke and carbon monoxide detectors that provide essential safety features for homes and businesses. Both models are designed to offer advanced protection against life-threatening hazards, employing the latest technologies to ensure user safety.

One of the standout features of the SA87CN and SA97CN is their ability to detect both smoke and carbon monoxide. This dual detection capability ensures comprehensive safety, as carbon monoxide is a colorless, odorless gas that can be particularly dangerous. The units utilize an electrochemical sensor for carbon monoxide detection alongside a photoelectric smoke sensor. This combination allows for quicker response times to various types of fires, particularly slow-smoldering fires that can produce significant amounts of smoke without a raging flame.

Another significant characteristic of these models is their voice alarm feature, which provides a verbal warning, clearly announcing the specific danger detected. This feature is crucial in emergencies, as it helps occupants quickly identify whether they are facing smoke or carbon monoxide, allowing them to make informed decisions about evacuation.

Ease of installation and use is another hallmark of the SA87CN and SA97CN. These detectors can be easily mounted on walls or ceilings, and their user-friendly design ensures that testing, maintenance, and battery replacements are straightforward. The units are equipped with a low battery indicator, alerting users when it's time to replace the battery, which is essential for maintaining reliable operation.

Additionally, both models feature a silence button, allowing users to temporarily silence non-threatening alarms caused by cooking smoke or other benign sources. This is especially useful in households with children or elderly individuals, as it minimizes the chances of causing panic during normal activities.

In summary, the First Alert SA87CN and SA97CN smoke and carbon monoxide detectors exemplify top-tier safety technology. With dual detection capabilities, voice alarms, simple installation, and user-friendly features, these devices are invaluable tools for ensuring the safety and well-being of inhabitants. Their combination of advanced technologies and practical characteristics makes them a reliable choice for protecting against fire and carbon monoxide hazards.