Nfpa Required Protection, Service and Warranty

• Don’t return to your home until the fire officials say that it is all right to do so.

There are situations where a smoke alarm may not be effective to protect against fire as stated in the NFPA Standard 72. For instance:

a)smoking in bed

b)leaving children home alone

c)cleaning with flammable liquids, such as gasoline

Further information on fire safety can be obtained in a pamphlet titled “IN A FIRE SECONDS COUNT” published by the NFPA, Batterymarch Park, Quincy, MA 02269

9. NFPA REQUIRED PROTECTION

The National Fire Protection Association’s Standard 72 reads as follows:

2-2.1.1.1 Smoke alarms shall be installed outside each separate sleeping area in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements and excluding crawl spaces and unfinished attics. In new construction, a smoke alarm shall be installed in each sleeping room.

A-2.5.2.1 Smoke Detection - Are More Smoke Detectors Desirable? The required number of smoke alarms might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke alarms. For this reason, it is recommended that the householder consider the use of additional smoke alarms for those areas for increased protec- tion. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not protected by the required smoke alarms. The installation of the smoke alarms in the kitchen, attic (finished or unfinished), or garage is normally not recommended, as these locations occasionally experience conditions that can result in improper operation.

This equipment should be installed in accordance with the National Fire Protection Association’s Standard 72 (NFPA, Batterymarch Park, Quincy, MA 02269).

NOTIFY YOUR LOCAL FIRE DEPARTMENT AND INSURANCE COMPANY OF YOUR SMOKE ALARM INSTALLATION.

10. SERVICE AND WARRANTY

If after reviewing this manual you feel that your smoke alarm is defective in any way, do not tamper with the unit. Return it for servicing to: Fyrnetics 1394 South Third St., Mebane, N.C. 27302. (See Warranty for in-warranty returns)

FIVE YEAR LIMITED WARRANTY

Fyrnetics warrants to the original purchaser that the enclosed smoke alarm (but not the bat- tery) will be free from defects in material and workmanship or design under normal use and service for a period of five years from the date of purchase. The obligation of Fyrnetics under this warranty is limited to repairing or replacing the smoke alarm or any part which we find to be defective in material, workmanship or design, free of charge to the customer, upon send- ing the smoke alarm with proof of date of purchase, postage and return postage prepaid, to Warranty Service Department, Fyrnetics 1394 South Third St., Mebane, N.C. 27302.

This warranty shall not apply to the smoke alarm if it has been damaged, modified, abused or altered after the date of purchase or if it fails to operate due to improper maintenance or inad- equate A.C. or D.C. electrical power.

THE LIABILITY OF FYRNETICS OR ANY OF ITS PARENT OR SUBSIDIARY CORPORATIONS ARISING FROM THE SALE OF THIS SMOKE ALARM OR UNDER THE TERMS OF THIS LIMIT- ED WARRANTY SHALL NOT IN ANY CASE EXCEED THE COST OF REPLACEMENT OF SMOKE ALARM AND, IN NO CASE, SHALL FYRNETICS, INC. OR ANY OF ITS PARENT OR SUBSIDIARY CORPORATIONS BE LIABLE FOR CONSEQUENTIAL LOSS OR DAMAGES RESULTING FROM THE FAILURE OF THE SMOKE ALARM OR FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE COMPANY’S NEGLIGENCE OR FAULT.

Since some states do not allow limitations on the duration of an implied warranty or do not allow the exclusion or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. While this warranty gives you specific legal rights, you may also have other rights which vary from state to state.

Also, Fyrnetics makes no warranty, express or implied, written or oral, including that of merchantability or fitness for any particular purpose, with respect to the battery.

The above warranty may not be altered except in writing signed by both parties hereto.

FYRNETICS

1394 South Third St., Mebane, N.C. 27302.

1-800-880-6788

1375-7201-02

PE120 specifications

The Fyrnetics PE120 is a state-of-the-art electronic device designed for precision and efficiency in a variety of applications. This product stands out due to its innovative design and advanced features, making it suitable for both professional and consumer use.

One of the main features of the PE120 is its high-resolution display. With a vibrant screen that allows for clear visibility in various lighting conditions, users can easily navigate through menus and settings. This display is coupled with a user-friendly interface, which simplifies the operation, making it accessible for users of all skill levels.

The PE120 is equipped with cutting-edge sensor technology, ensuring accurate data collection and processing. This is particularly useful in fields such as environmental monitoring and scientific research, where precision is paramount. Moreover, the device supports multiple sensor types, enabling users to customize their setup according to specific requirements.

In terms of connectivity, the Fyrnetics PE120 excels with its various options. It includes Bluetooth and Wi-Fi capabilities, allowing for seamless integration with smartphones and other devices. This connectivity opens up possibilities for remote monitoring and real-time data sharing, which can enhance productivity and collaboration.

Battery life is another critical characteristic of the PE120. This device is designed with energy efficiency in mind, boasting long-lasting battery performance that reduces the need for frequent recharging. This feature is especially valuable for users who require portability and reliability, such as field workers and researchers.

Furthermore, the PE120 is built with durability in mind. It is robust and designed to withstand challenging environmental conditions, making it ideal for outdoor use. Its rugged design is complemented by an IP rating, ensuring that the device is resistant to dust and water, which adds to its versatility.

In summary, the Fyrnetics PE120 combines advanced technology, user-friendly features, and durable design. It is an ideal solution for individuals and professionals looking for an efficient and reliable electronic device. Its high-resolution display, accurate sensor technology, versatile connectivity options, impressive battery life, and robust construction make it a standout choice in its category. Whether for scientific research, environmental monitoring, or general use, the PE120 delivers performance and reliability to meet a variety of needs.