Recommended Locations for Detectors | Fyrnetics PE120 specification

WARNING! REMOVAL OF THE SMOKE ALARM BATTERY AND DISCONNECTING OR LOSS OF A.C. POWER WILL RENDER THE SMOKE ALARM INOPERATIVE.

ELECTRICAL RATING: 120 VAC, 60HZ, 80mA maximum per detector (maximum 80mA for originat- ing unit with 24 alarms interconnected).

IMPORTANT! READ ALL INSTRUCTIONS BEFORE INSTALLATION AND KEEP THIS MANUAL NEAR THE ALARM FOR FUTURE REFERENCE.

CONTENTS OF THIS MANUAL

1 -- RECOMMENDED LOCATIONS FOR SMOKE ALARMS

2 -- LOCATIONS TO AVOID

3 -- INSTALLATION INSTRUCTIONS

4 -- OPERATION AND TESTING

5 -- NUISANCE ALARMS

6 -- MAINTENANCE

7 -- LIMITATIONS OF SMOKE ALARMS

8 -- GOOD SAFETY HABITS

9 -- NFPA PROTECTION STANDARD 72, SECTION 2-2.1

10 -- SERVICE AND WARRANTY

Do not try to repair the smoke alarm yourself. Refer to the instructions in Section 11 for service.

1. RECOMMENDED LOCATIONS FOR DETECTORS

•Locate the first alarm in the immediate area of the bedrooms. Try to protect the exit path as the bedrooms are usually farthest from the exit. If more than one sleeping area exists, locate addi- tional alarms in each sleeping area.

•Locate additional alarms to protect any stairway as stairways act like chimneys for smoke and heat.

•Locate at least one alarm on every floor level.

•Locate an alarm in every bedroom where a smoker sleeps.

•Locate an alarm in every room where electrical appliances are operated (i.e. portable heaters or humidifiers).

•Locate an alarm in every room where someone sleeps with the door closed. The closed door may prevent the alarm from waking the sleeper.

•Smoke, heat, and combustion products rise to the ceiling and spread horizontally. Mounting the smoke alarm on the ceiling in the center of the room places it closest to all points in the room. Ceiling mounting is preferred in ordinary residential construction.

•For mobile home installation, select locations carefully to avoid thermal barriers that may form at the ceiling. For more details, see MOBILE HOME INSTALLATION below.

•When mounting an alarm on the ceiling, locate it at a minimum of 4” (10 cm) from the side wall and 2 feet (60.96 cm) from any inside corner (see Diagram A).

•When mounting the alarm on the wall, it is best to use an inside wall with the top edge of the alarm at a minimum of 4” (10 cm) and a maximum of 12” (30.5 cm) below the ceiling, and at least 2 feet (61 cm) from any inside corner (see Diagram A).

•Put smoke alarms at both ends of a bedroom hallway or large room if the hallway or room is more than 30 feet (9.1 m) long.

SINGLE FLOOR PLAN

MULTIPLE FLOOR PLAN

DIAGRAM A

Smoke Alarms for Minimum Protection

Smoke Alarms for Maximum Protection

Smoke Alarms with “HUSH” Control

DIAGRAM B

MOBILE HOME INSTALLATION

Mobile homes built in the past five to seven years have been designed to be energy efficient. Install smoke alarms as recommended above (refer to RECOMMENDED LOCATIONS and Diagram A).

In mobile homes that are not well insulated compared to present standards, extreme heat or cold can be transferred from the outside to the inside through poorly insulated walls and roof. This may create a thermal barrier which can prevent the smoke from reaching an alarm mounted on the ceil- ing. In such units, install the smoke alarm on an inside wall with the top edge of the alarm at a minimum of 4” (10 cm) and a maximum of 12” (30.5 cm) below the ceiling (see Diagram A).

If you are not sure about the insulation in your mobile home, or if you notice that the outer walls and ceiling are either hot or cold, install the alarm on an inside wall. For minimum protection, install at least one alarm close to the bedrooms. For additional protection, see SINGLE FLOOR PLAN in Diagram B.

WARNING: TEST YOUR SMOKE ALARM OPERATION AFTER R.V. OR MOBILE HOME VEHICLE HAS BEEN IN STORAGE, BEFORE EACH TRIP AND AT LEAST ONCE A WEEK DURING USE.

PE120 specifications

The Fyrnetics PE120 is a state-of-the-art electronic device designed for precision and efficiency in a variety of applications. This product stands out due to its innovative design and advanced features, making it suitable for both professional and consumer use.

One of the main features of the PE120 is its high-resolution display. With a vibrant screen that allows for clear visibility in various lighting conditions, users can easily navigate through menus and settings. This display is coupled with a user-friendly interface, which simplifies the operation, making it accessible for users of all skill levels.

The PE120 is equipped with cutting-edge sensor technology, ensuring accurate data collection and processing. This is particularly useful in fields such as environmental monitoring and scientific research, where precision is paramount. Moreover, the device supports multiple sensor types, enabling users to customize their setup according to specific requirements.

In terms of connectivity, the Fyrnetics PE120 excels with its various options. It includes Bluetooth and Wi-Fi capabilities, allowing for seamless integration with smartphones and other devices. This connectivity opens up possibilities for remote monitoring and real-time data sharing, which can enhance productivity and collaboration.

Battery life is another critical characteristic of the PE120. This device is designed with energy efficiency in mind, boasting long-lasting battery performance that reduces the need for frequent recharging. This feature is especially valuable for users who require portability and reliability, such as field workers and researchers.

Furthermore, the PE120 is built with durability in mind. It is robust and designed to withstand challenging environmental conditions, making it ideal for outdoor use. Its rugged design is complemented by an IP rating, ensuring that the device is resistant to dust and water, which adds to its versatility.

In summary, the Fyrnetics PE120 combines advanced technology, user-friendly features, and durable design. It is an ideal solution for individuals and professionals looking for an efficient and reliable electronic device. Its high-resolution display, accurate sensor technology, versatile connectivity options, impressive battery life, and robust construction make it a standout choice in its category. Whether for scientific research, environmental monitoring, or general use, the PE120 delivers performance and reliability to meet a variety of needs.