Introduction

Pg. 7-1

710LS

713LS

PHOTOELECTRIC TYPE SMOKE ALARMS

AC POWERED, 120V, 60Hz

Installation Instructions - Owner's/User's Information Manual

READ CAREFULLY AND SAVE

The 713LS Smoke Alarm is a Photoelectric Type Alarm for use as an evacuation device in residential applications, while the 710LS is for use as an alert and relocate device. Each alarm has a solid state piezo signal to warn and alert the household to the presence of

threatening smoke.

Your Photoelectric alarm is designed to detect the smoke that results from an actual fire. Consequently, it is uncommon for household smoke such as cigarette smoke or normal cooking smoke to cause an alarm.

Under normal conditions, the light generated by the pulsing infrared LED is not seen by the light sensor, as it

is positioned out of the direct path of the light beam. When smoke enters the sensing chamber, light from the pulsing LED light source is reflected by the smoke particles onto the photodiode light sensor. At the first sighting of smoke, the alarm is put into a pre-alarm mode. This is indicated by a rapidly flashing LED on the face of the alarm. Once the light sensor confirms smoke for 2 consecutive pulses inside the chamber, the light sensor produces the signal necessary to trigger the alarm.

This technique of verifying the smoke condition, combined with a 5-to-1 signal-to-noise ratio, substantially reduces the possibility of nuisance alarms.


MODEL NO.		DESCRIPTION
710LS*	120 VAC Wall Mounted, Provided
	With a 9 ft. Line Cord, Pulsating Horn
713LS	Same as 710LS but with a Temporal Horn

*This unit produces a non-temporal audible alarm and is therfore not intended for locations where the desired action of the occupant(s) is evacuation.

NOTE: Loss of electrical input will cause the alarm not to function. For maximum safety you should install both battery operated and AC powered smoke alarms.

HOW YOUR SMOKE

ALARM WORKS

The 710LS/713LS Smoke Alarm operates on the photoelectric light scatter principle. The unit's sensing chamber houses a light source and a light sensor.

The darkened sensing chamber is exposed to the atmosphere and designed to permit optimum smoke entry from any direction while rejecting light from outside the alarm.

The light source is an infrared (invisible) LED which pulses every 8 seconds. The light sensor is a photodiode matched to the light frequency of the LED light source.

HOW TO TELL IF YOUR SMOKE ALARM IS WORKING PROPERLY

·Your alarm is provided with an alarm horn and pulsating Light Emitting (indicator) Diode, which pulses every 15-30 seconds, and a green AC power on LED.

·When turning the test knob on the alarm to TEST 1, the red LED will rapidly flash, the horn will sound and the strobe light will flash. If AC power fails, the green LED will turn off.

·The test knob of your alarm simulates actual smoke conditions.

FIRE PROTECTION PLAN

This Smoke Alarm can quickly alert you to the presence of smoke-it cannot prevent fire. Please note that there are hazards against which smoke detection may not be effective, such as smoking in bed, explosions, when a closed door separates the alarm from the source of the smoke, etc. The ultimate responsibility for fire protection rests solely on you.

1.To minimize fire hazards-avoid improper storage of flammable liquids and don't leave small children home alone.

2.Bedroom doors should be closed while sleeping if a smoke alarm is installed in the bedroom. They act as a barrier against heat and smoke.

3.Establish an escape plan:

(a)Post a detailed floor plan depicting the chosen escape routes.

(b)Each bedroom should have at least two escape routes.

(c)Make sure your children know what to do in case of fire and teach them to follow the escape plan you have posted.

(d)Agree on an outside meeting place.

(e)Conduct fire drills at least twice a year.

(f)Be sure each member of the family is familiar

with the smoke alarm so they can react properly. If the smoke alarm should sound:

1.Never waste time dressing or gathering valuables. Follow the escape route and leave the house immediately.

710LS, 713LS specifications

Gentek 710LS and 713LS are advanced technologies in the realm of electronic labels, designed to deliver unparalleled performance and efficiency in various applications. These models represent a significant leap in label printing, ensuring businesses can meet their branding and information needs more effectively than ever.

The Gentek 710LS is engineered for high-speed label printing, capable of producing vibrant and detailed designs. It features cutting-edge thermal transfer technology, which allows for long-lasting impressions on various surfaces. This model is equipped with a robust printing resolution, ensuring that even intricate graphics and text are rendered beautifully. Its compact design makes it suitable for both large-scale production and small-volume tasks, giving users flexibility in their labeling solutions.

Meanwhile, the Gentek 713LS builds on the capabilities of the 710LS, offering enhanced features that cater to more demanding environments. It boasts improved connectivity options, including wireless and Ethernet capabilities, allowing for seamless integration within existing workflows. The 713LS is designed with user-friendly interface systems, making it easy to navigate through printing options and monitor job status.

Both models incorporate advanced sensor technology, which ensures precise label detection and alignment, reducing waste and improving accuracy in printing. They support an array of label sizes and types, making them ideal for various industries, including retail, healthcare, and manufacturing.

In terms of durability, the Gentek 710LS and 713LS are built to withstand harsh conditions. The printed labels are resistant to abrasion, moisture, and UV light, ensuring that they remain legible and adhere to surfaces over time. This durability is crucial for businesses that require reliable labeling solutions for products exposed to challenging environments.

Moreover, the Gentek 710LS and 713LS are designed with sustainability in mind. They minimize energy consumption and use eco-friendly materials, contributing to a greener planet. These models also support easy maintenance, featuring accessible components for quick replacements or upgrades.

In conclusion, the Gentek 710LS and 713LS are formidable choices for any business seeking high-quality labeling solutions. With their advanced technologies, robust performance, and user-friendly features, they stand out as reliable options for efficient and effective label printing. Whether for inventory management, branding, or compliance, these models provide the versatility and durability businesses need in today’s competitive landscape.