Honeywell Smoke Alarm installation instructions Parts List, Part Numbers Description

Application Note:

Fire-Lite IPDACT Setup for Installing Dealers

These pictorial instructions should be used in conjunction with the formal PID (Product Installation Document) included with the IPBRKT or IPENC as well as the instructions included with the IPDACT. Please Read all documentation prior to performing any installation or programming.

Installation Instructions for use with HyperTerminal™ and serial port

Parts List

Part Numbers	Description
IPDACT	Internet Communicator-Contact ID only.
	Requires compatible FL panel equipped
	with on-board or optional DACT. Requires
	300mA aux non-reset able power from
	FACP. Includes cable from panel primary
	telco port to IPDACT.
IPBRKT	Bracket for mounting IPDACT inside MS-
	9200UDLS common enclosure or in
	optional HPP-300ULX power supply
IPSPLT	Splitter for dual phone lines to IPDACT
	input cable.
ALMSC119	RJ45-DB9F PC serial port programming
	cable for IPDACT.
IPENC	Optional cabinet for mounting IPDACT next
	to compatible Fire-Lite FACP. Use when
	connecting to older non common enclosure
	panels such as MS-9200UD or MS-9600.
	Includes IPBRKT mounting bracket already
	installed.
HP300ULX	Optional UL listed Fire Aux power supply for
	mounting IPDACT next to compatible Fire
	Panel when additional power is required for
	IPDACT.
5/19/2008		1 of 15