2. Installation using IPENC or HP300ULX
The IPENC is used for mounting the IPDACT next to panels that cannot accept the IPBRKT directly inside the enclosure. Examples of these include the MS- 9200UD and
Install the IPDACT onto the factory mounted IPBRKT inside the IPENC using the 4 supplied ¼”X
For complete information of all installation options, follow the wiring instructions found in the included Product Installation Document.
Mount the IPENC next to the FACP as shown in the drawing below.
Mounting the IPBRKT inside the HP300ULX when more power is required
5/19/2008 | 5 of 15 |