Honeywell 800-04433V1 manual Program the Communications Module, 7720P Programmer, Done

Page 8

iPGSM-COM Commercial Fire Communicator – Installation and Setup Guide

STEP 5 – Program the Communications Module

You must use the 7720P Programming tool to program the iPGSM-COM.

When using the 7720P Programming tool, the values given below are for most installations. Press the [#] key to accept the displayed default value (xxx) or enter the new value and press the [#] key for the next prompt. Use the [] key to scroll through a list of options.

1.

 

 

(no display)

 

 

Connect the 7720P.

 

 

 

 

 

 

 

 

 

2.

 

 

7720P PROGRAMMER

 

Press [#].

 

3.

 

 

 

 

Press [Shift] then [Y], then [#].

 

 

Strt Prog Mode? Y/N

 

 

 

 

 

 

 

 

4.

 

 

Program Device? Y/N

 

Press [Shift] then [Y], then [#].

 

5.

 

 

 

 

 

Enter number 01-99, then press [#].

 

 

Primary City ID

(??)

 

 

 

 

 

 

 

 

 

6.

 

 

Primary CS ID

(??)

 

Enter number 01-FE, then press [#].

 

7.

 

 

 

 

 

Enter number 0001-9999, then press [#].

 

 

Primary Sub ID

(????)

 

 

 

 

 

 

 

 

 

8.

 

 

Review? Y/N

 

 

Enter choice, then press [#]. Follow the prompts.

 

9.

 

 

 

 

Enter choice, then press [#]. Follow the prompts.

 

 

Create Password? Y/N

 

 

 

 

 

 

 

10.

 

 

Exit Prog Mode? Y/N

 

Press [Shift] then [Y], then press [#].

 

11.

 

 

 

 

 

 

 

DONE

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: If an error in programming occurs, set the factory defaults (see next topic) and reprogram the iPGSM-COM.

To exit the programming mode, press [N] in response to the "Review?" prompt. Then press [Y] to the "Exit Prog Mode?" prompt. Upon exiting, the root file is updated to log the changes made. A message is displayed telling the user that this step is being executed. When complete, the message "DONE" is displayed to indicate the file was successfully uploaded.

Note: If critical configuration changes were made, such as the mode of operation, the communications module will reset to ensure that the programming features are enabled.

If the file is not successfully uploaded, one of the following prompts will be displayed. Follow the steps shown below until the upload is successful.

 

Display

Description

What to do

 

 

 

Module is not yet initialized.

Wait for RSSI indicator LEDs to be lit.

 

Cannot Upload

 

 

Try Again? Y/N_

 

 

Press [Y].

 

 

 

 

 

 

 

Network problem, or you

Initiate the Force Server Update

 

Failed to Update

 

 

Root File!

 

answered "N" to "Cannot

Command by pressing the [0] key.

 

 

Upload Try Again?" prompt.

 

 

 

 

 

 

 

 

 

Setting Factory Defaults

To reset the programming options to factory-default values, at the "Exit Prog Mode?" prompt press [Shift] plus [ESC]. Note, setting the factory defaults will also erase any password that may have been entered.

Set Default?

Y/N_

Press [Y] to reset factory default values. Press [N] to cancel this function.

Press [Shift] then [Y], then [#]. The Create Password prompt appears, follow the prompts then exit.

– 6 –

Page 7 Page 9
Image 8
Page 7 Page 9
Contents IPGSM-COM Contents Operation InstallationGeneral Information Activate the SIM and Setup the Customer Account Register the Communications Module with AlarmNetDetermine the Signal Strength and Select a Location Mount and WirePowerBoost To Facility Ground Conduit BatteryWall Outlet BOX K14358 Conduit Done Program the Communications Module7720P Programmer Test the System Configure the Fire PanelIPGSM-COM Trouble Detection Information Dialer Capture Module Information LED Board InformationPowerBoost1 Module Information ActiveIGSM Communications Module Information OFF Normal Slow Blink Loss of communication withIPGSM-COM Specifications SpecificationPage Wiring Diagram + BatteryÊ800-04433V1Š

800-04433V1 specifications

The Honeywell 800-04433V1 is a robust and efficient product designed to enhance the operational capabilities of various systems. As part of Honeywell's extensive portfolio, this device is engineered with advanced technologies that cater to both industrial and commercial applications, emphasizing reliability and user-friendly operation.

One of the standout features of the Honeywell 800-04433V1 is its versatility. It is compatible with a wide range of systems, making it an ideal choice for facilities looking to upgrade their operations without overhauling existing infrastructure. The device supports several communication protocols, ensuring seamless integration into various control architectures.

The Honeywell 800-04433V1 is built with advanced sensing technologies that provide accurate data readings and measurements. This high level of precision is crucial for applications requiring stringent compliance with safety and performance standards. Its robust sensors are capable of operating under challenging environmental conditions, ensuring consistent performance regardless of external factors.

Energy efficiency is another prominent characteristic of the Honeywell 800-04433V1. The device is designed to minimize power consumption while maintaining optimal operational performance. This not only helps businesses reduce operational costs but also contributes to a smaller carbon footprint, making it a sustainable choice for modern enterprises.

The user interface of the Honeywell 800-04433V1 is intuitive and easy to navigate, allowing operators to monitor and control processes with minimal training. The device typically features a clear display and programmable settings, enabling users to customize operations according to specific needs and preferences. This ease of use translates into increased productivity and more streamlined workflows.

In terms of durability, the Honeywell 800-04433V1 is constructed with high-quality materials that can withstand the rigors of industrial environments. Its design often incorporates protective features such as moisture resistance and shock absorption, which extend the device's lifespan and reduce the potential for maintenance and replacement costs.

Moreover, Honeywell prioritizes innovation, and the 800-04433V1 reflects this commitment through its ongoing support and software updates. This ensures that users can benefit from the latest advancements in technology, further enhancing their operational capabilities.

In summary, the Honeywell 800-04433V1 is an advanced device designed for efficiency, flexibility, and durability. With its intuitive user interface, energy-saving characteristics, and compatibility with various systems, it stands out as a top choice for businesses looking to enhance their operational effectiveness.
Top Page Image Contents