Kidde 820-1356 manual End Of Life, Limitations of Smoke Alarms, Good Safety Habits

Page 7

6. End Of Life

Approximately ten years after the alarm is first powered up it will enter error mode as indicated by the unit chirping and the red LED flashing every 30 seconds. When the alarm reaches the end of its useful life it will discharge its battery so that it can be safely disposed of properly. When the AC power is removed the unit will be shut off.

Alarm Removal

Before removing, disconnect AC power to the alarm. To remove the alarm from the mounting bracket rotate it counter-clockwise and gently pull it down to expose the AC quick connect harness. Simply pull the two halves of the connector apart to disconnect the alarm from AC power. The alarm will continue to operate on battery backup for at least 1 week when the battery is fully charged and has not been exposed to high or low ambient conditions for extended periods through out the life of the product.

Disabling The Alarm

If the alarm is to be disposed of prior to it reaching its end of life, the label on the back of the unit should be pierced in the indicated location and the switch pressed to render the unit safe for disposal. When doing so the alarm will produce 10 short beeps then shut off.

WARNING: ONCE THE LABEL ON THE BACK OF THE ALARM HAS BEEN PIERCED, THE INTEGRITY OF THE ALARM HAS BEEN COM- PROMISED AND IT SHOULD NO LONGER BE USED. DO NOT RE- INSTALL THE ALARM ONCE IT HAS BEEN DISABLED OR REACHED IT END OF LIFE. THIS ACTION WILL VOID THE WARRANTY AND RESOLVE KIDDE OF ANY OBLIGATION.

7. Limitations of Smoke Alarms

WARNING: PLEASE READ CAREFULLY AND THOROUGHLY

NFPA 72 states: Life safety from fire in residential occupancies is based primarily on early notification to occupants of the need to escape, fol- lowed by the appropriate egress actions by those occupants. Fire warn- ing systems for dwelling units are capable of protecting about half of the occupants in potentially fatal fires. Victims are often intimate with the fire, too old or young, or physically or mentally impaired such that they cannot escape even when warned early enough that escape should be possible. For these people, other strategies such as protec- tion-in-place or assisted escape or rescue are necessary.

Smoke alarms are devices that can provide early warning of possible fires at a reasonable cost; however, alarms have sensing limitations.

7. Limitations of Smoke Alarms

Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Home fires develop in different ways and are often unpredictable. For maximum protection, Kidde recommends that both Ionization and Photoelectric alarms be installed.

A battery powered alarm must have a battery of the specified type, in good condition and installed properly.

AC powered alarms (without battery backup) will not operate if the AC power has been cut off, such as by an electrical fire or an open fuse.

Smoke alarms must be tested regularly to make sure the batteries and the alarm circuits are in good operating condition.

Smoke alarms cannot provide an alarm if smoke does not reach the alarm. Therefore, smoke alarms may not sense fires starting in chim- neys, walls, on roofs, on the other side of a closed door or on a differ- ent floor.

If the alarm is located outside the bedroom or on a different floor, it may not wake up a sound sleeper.

The use of alcohol or drugs may also impair one’s ability to hear the smoke alarm. For maximum protection, a smoke alarm should be installed in each sleeping area on every level of a home.

Although smoke alarms can help save lives by providing an early warning of a fire, they are not a substitute for an insurance policy. Home owners and renters should have adequate insurance to protect their lives and property.

8. Good Safety Habits

DEVELOP AND PRACTICE A PLAN OF ESCAPE

Install and maintain a fire extinguisher on every level of the home and in the kitchen, basement and garage. Know how to use a fire extin- guisher prior to an emergency.

Make a floor plan indicating all doors and windows and at least two

(2) escape routes from each room. Second story windows may need a rope or chain ladder.

Have a family meeting and discuss your escape plan, showing every- one what to do in case of fire.

Image 7
Contents Model KN-SMFM-I Smoke AlarmImportant Warning Statements WelcomeContents of This User’s Guide Product SpecificationsRecommended Locations for Smoke Alarms Locations To Avoid Installation InstructionsWiring Requirements Wiring Instructions for Quick Connect HarnessDo not USE Alarm if Label has Been Punctured Operation and TestingWires on Alarm Harness Connected to Set upNuisance Alarms Develop and Practice a Plan of Escape Limitations of Smoke AlarmsGood Safety Habits End Of LifeNfpa Required Protection NRC InformationTEN Year Limited Warranty Service and WarrantyQuestions or for More Information

820-1356 specifications

The Kidde 820-1356 is a smoke alarm that combines advanced safety features with user-friendly technology to provide a reliable solution for fire detection in homes and businesses. Understanding its main features, technologies, and characteristics is crucial for anyone considering an upgrade to their fire safety systems.

One of the standout features of the Kidde 820-1356 is its dual-sensor technology. This smoke alarm utilizes both photoelectric and ionization sensing methods, allowing it to detect different types of smoke more effectively. The photoelectric sensor is adept at sensing slow-burning fires, which produce larger smoke particles, such as those from smoldering furniture or electrical fires. The ionization sensor, on the other hand, quickly responds to fast-burning fires that generate smaller particles, like those from paper or flammable liquids. This combination enhances the alarm’s overall responsiveness, providing a faster response time in various fire situations.

In terms of design, the Kidde 820-1356 features a user-friendly interface. It includes a large test/silence button, which allows users to test the alarm’s functionality easily or silence it when necessary. The alarm also has a green power indicator light that lets you know it is functioning correctly, providing peace of mind at a glance.

Another important characteristic of this smoke alarm is its dependable power source. The Kidde 820-1356 operates on a sealed lithium battery that lasts for up to 10 years, eliminating the need for frequent battery replacements. This feature is particularly advantageous as it minimizes maintenance and ensures the alarm remains functional for an extended period. Additionally, the alarm emits a chirping sound when its battery is low to alert users to replace the unit.

The Kidde 820-1356 is also designed to be easy to install. With a quick-mount bracket and included hardware, users can install it in various locations around a home, including hallways, bedrooms, and living areas. This versatility ensures that critical areas are monitored effectively.

Overall, the Kidde 820-1356 stands out as a feature-rich smoke alarm that leverages advanced sensing technologies for optimal fire detection. Its user-friendly design, long-lasting power source, and ease of installation make it an excellent choice for enhancing fire safety in any environment. By selecting this reliable device, users can significantly reduce the risk of fire hazards and ensure the safety of their occupants.