Limitations of Smoke Alarms, Cleaning Your Alarm

CLEANING YOUR ALARM

YOUR ALARM SHOULD BE CLEANED AT LEAST ONCE A YEAR

If the tamper resist feature has been activated you will need to follow the instructions in Section 3 to remove your alarm for maintenance.

To clean your alarm, remove it from the mounting bracket as outlined in the begin- ning of this section. You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner hose and blowing or vacuuming through the openings around the perimeter of the alarm. The outside of the alarm can be wiped with a damp cloth.

After cleaning, reinstall your alarm and test your alarm by using the test button. If cleaning does not restore the alarm to normal operation the alarm should be replaced.

7.LIMITATIONS OF SMOKE ALARMS

WARNING: PLEASE READ CAREFULLY AND THOROUGHLY

•NFPA 72 states: Life safety from fire in residential occupancies is based primarily on early notification to occupants of the need to escape, followed by the appropriate egress actions by those occupants. Fire warning systems for dwelling units are capable of protecting about half of the occupants in potentially fatal fires. Victims are often intimate with the fire, too old or young, or physically or mentally impaired such that they cannot escape even when warned early enough that escape should be possible. For these people, other strategies such as protection-in-place or assist- ed escape or rescue are necessary.

•Smoke alarms are devices that can provide early warning of possible fires at a rea- sonable cost; however, alarms have sensing limitations. Ionization type alarms offer a broad range of fire sensing capabilities but are better at detecting fast flaming fires than slow smoldering fires. Photoelectric alarms sense smoldering fires better than flaming fires. Home fires develop in different ways and are often unpre- dictable. Neither type of alarm (photoelectric or ionization) is always best, and a given alarm may not always provide warning of a fire.

•A battery powered alarm must have a battery of the specified type, in good condition and installed properly.

•A.C. powered alarms (without battery backup) will not operate if the A.C. power has been cut off, such as by an electrical fire or an open fuse.

•Smoke alarms must be tested regularly to make sure the batteries and the alarm circuits are in good operating condition.

•Smoke alarms cannot provide an alarm if smoke does not reach the alarm. Therefore, smoke alarms may not sense fires starting in chimneys, walls, on roofs, on the other side of a closed door or on a different floor.

•If the alarm is located outside the bedroom or on a different floor, it may not wake up a sound sleeper.

•The use of alcohol or drugs may also impair one’s ability to hear the smoke alarm. For maximum protection, a smoke alarm should be installed in each sleeping area on every level of a home.

•Although smoke alarms can help save lives by providing an early warning of a fire, they are not a substitute for an insurance policy. Home owners and renters should have adequate insurance to protect their lives and property.

0910 specifications

The Kidde 0910 is a cutting-edge smoke detector that exemplifies the company’s commitment to safety and innovation. Designed for residential use, this compact and reliable device provides early warning of smoke and fire hazards, helping to protect lives and property.

One of the standout features of the Kidde 0910 is its photoelectric sensing technology, which enhances its ability to detect smoldering fires that produce a significant amount of smoke. Unlike traditional ionization detectors that are more effective at sensing fast-flaming fires, the photoelectric technology offers a quicker response to the smoldering fires often caused by items like upholstered furniture and bedding. This adaptability can significantly reduce false alarms while enhancing actual threat detection.

Another prominent characteristic of the Kidde 0910 is its battery-operated design. The device runs on a 9-volt battery, ensuring continuous operation even during power outages. With a battery life that generally lasts one year, the system includes a low-battery indicator to alert users when it's time to replace the battery. This feature helps maintain the detector’s efficacy at all times.

Moreover, the Kidde 0910 boasts a sleek and unobtrusive design, making it easy to install in any part of the home, including hallways, living rooms, and bedrooms. Its lightweight structure means minimal disruption during installation, and the device can be mounted on walls or ceilings with ease.

Additionally, the Kidde 0910 is equipped with a test/reset button, enabling users to check the functionality of the unit regularly. This feature promotes a proactive approach to safety within the home.

Lastly, the Kidde 0910 complies with industry standards, ensuring it meets rigorous safety parameters, which provides peace of mind to homeowners. With its combination of advanced sensing technology, user-friendly features, and reliable performance, the Kidde 0910 is a compelling choice for anyone looking to enhance their home’s fire safety measures. Investing in this smoke detector not only safeguards lives but also ensures families can enjoy their homes with added security.