Niles Audio SVL-6 manual

S P E A K E R S E L E C T I O N / V O L U M E C O N T R O L S Y S T E M

3.Set the SVL-6 volume controls which correspond to the speaker pairs you wish to play to maximum.

4.Locate the appropriate ON/OFF buttons on the SVL-6. Set them to the ON position.

5.Turn on the amplifier or receiver and select as source, such as the tuner or CD player.

6.Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maximum) listening level. Be careful not to overdrive or "clip" your amplifier. If the sound becomes muddy or distorted, you have reached the limit of your ampli- fier's volume capability and should quickly reduce the volume to avoid damaging your speakers.

7.Using the appropriate volume controls on the front of the SVL-6, adjust the volume of the speakers to the desired listen- ing level.

8.You can turn off the speakers by turning the corresponding volume controls on the SVL-6 fully counter-clockwise, or by pressing the appropriate ON/OFF button. Refer to the Protection chart for the correct setting of the PROTECTION button.

1

3