Ei Electronics Ei164RC, Ei166RC, B16009-R0-160RC Series manual Alarm Removal, Locate Removal Slot

Page 1

B16009-R0-160RC SERIES-U&C 17/1/07 11:13 AM Page 1

2. ALARM REMOVAL

LOCATE REMOVAL SLOT
M
TO RE	OVE PUS	H
SCRE W
& PUSH	DRIVER INT
	COVER A		O S
				LOT
		WAY
LOCATE THE ARROW ON THE FRONT FACE OF THE ALARM.
THE SLOT IS LOCATED DIRECTLY ABOVE THE ARROW.

INSERT SCREWDRIVER

INSERT A FLAT-BLADED SCREWDRIVER HORIZONTALLY APPROX. 1cm INTO THE CENTRE OF THE REMOVAL SLOT

SLIDE ALARM OFF BASE

WITH THE SCREWDRIVER STILL INSERTED, PUSH THE LOWER

HALF OF THE ALARM AWAY FROM THE SCREWDRIVER, IN THE

DIRECTION OF THE ARROW ON THE COVER

REMOVE ALARM

HOLD THE LOWER HALF OF THE ALARM AND REMOVE FROM

THE BASE PLATE BY MOVING IT VERTICALLY DOWNWARDS,

TOWARDS THE FLOOR.

2

Image 1

Contents Locate Removal Slot Alarm RemovalImportant Information Testing & Maintaining Your Alarm Changing the BatteryInspection &TESTING Procedure Models Ei141, Ei144 & Ei146 only This can set fire to the Alarm and damage the houseModels Ei161RC, Ei164RC & Ei166RC only Cleaning Your AlarmHush Feature Nuisance AlarmsPlanning Your Escape Route Important SafeguardsLimitations of Smoke / Heat Alarms Getting Your Alarm Serviced Alarm Control OptionalFive Year Guarantee Frequent Nuisance Alarms Occur TroubleshootingAlarm Sounds for no Apparent Reason Index Interconnected Alarms do not ALL SoundAlkaline Primary Battery BACK-UP 230V~ Smoke & Heat AlarmsRegular Checks Rechargeable Lithium Cell BACK-UP