13. TROUBLESHOOTING (CONTINUED)
beeps, a fault may exist. Disconnect the mains first and replace the unit - see “ALARM REMOVAL” section on page 2.
(2)Ionisation Smoke Alarms (Ei141/161RC) and Heat Alarms (Ei144/164RC) give two beeps 10 minutes after the test/hush button is pressed.
(3)If an Optical unit (Ei146/166RC) beeps without the red light flashing at the same time, the chamber is defective. Clean the chamber.
4. INTERCONNECTED ALARMS DO NOT ALL SOUND:
(1)Hold test button for 10 seconds after first alarm has sounded to ensure signal is transmitted to all units.
(2)One or more of the connections may not be correctly connected. We recommend you consult a qualified electrician.
Aico Ltd. Mile End Business Park, Maesbury Rd, Oswestry,
Shropshire SY10 8NN, U.K. Tel: 0870 758 4000
www.aico.co.uk
Ei Electronics. Shannon, Co Clare, Ireland. Tel: 061 471277
www.eielectronics.com
INDEX
1. REGULAR CHECKS | 1 |
2. ALARM REMOVAL | 2 |
3. IMPORTANT INFORMATION | 3 |
4. CHANGING THE BATTERY | 4 |
5. TESTING & MAINTAINING YOUR ALARM | 4 |
6. CLEANING YOUR ALARM | 6 |
7. NUISANCE ALARMS | 7 |
8. IMPORTANT SAFEGUARDS | 8 |
9. PLANNING YOUR ESCAPE ROUTE | 8 |
10. ALARM CONTROL | 10 |
11. GETTING YOUR ALARM SERVICED | 10 |
12. 5 YEAR GUARANTEE | 10 |
13. TROUBLESHOOTING | 11 |
12