Installation Fundamentals | Niles Audio AT8, AT6, AT5 specs

Installation Fundamentals

Installation

Fundamentals

Running the Speaker Wire in New Construction

If you have doubts about whether you are capable of installing a Niles AT Series speaker in your walls, consult a Niles dealer or professional installer. They have special tools, techniques, and experience to make the impossible possible. The installer can provide you with an estimate before any work is done.

Scheduling and Preparation

Plan to schedule the speaker wiring after the electrical wiring is finished. That way you can avoid wire routes which could potentially induce hum over the speaker wire. The basic rules are:

•Never run speaker wire through the same hole as an electrical cable.

•Never run speaker wire into the same J-box as electrical cable.

•Avoid running the speaker wire beside the electrical cable. Keep your speaker cable at a distance of at least 18"-22" from any electrical power cable.

Figure 3

Side-by-side wiring is unavoidable in par- ticular spots in every house, just move the speaker wire route away as soon as possi- ble. If construction forces a side by side run for more than ten feet, install metal conduit or shielded speaker wire. Low- voltage wires such as doorbells, inter- coms, telephone, security, or television cannot cause interference or hum on your speaker wires, so you can safely run all of them at the same time, through the same holes, side-by-side.

Before you drill any holes, mount the speaker brackets in the desired speaker locations and mount p-rings or open backed J-boxes where the in-wall volume controls and stereo equipment will be.

Safety First!

Wear gloves, safety goggles and head pro- tection when drilling. Avoid nails, they ruin bits and they can create injury. Pay particu- lar care when using “hole-hogs” and other powerful electric drills; the torque of the drill when suddenly stopped by a nail can break the wrist of a strong man.

Drilling

Use a bit that is large enough for the wires you plan to run. An auger bit is the pre- ferred bit for rough-in wiring. It will actu- ally pull itself through the wood, so that the drill motor, not you, does most of the work. You may be drilling a lot of holes, so this is an important consideration.

Always drill the holes in the center of the stud. If you have to notch the stud or drill the hole closer than one inch from the edge of the stud, protect the wire with a nail plate (See Figure 3).

When drilling holes in ceiling joists drill in the center of the joists and try to locate the hole near the end of the joist. DO NOT drill through a “gluelam” or any load bearing beam without the direction of your contractor.

AT6, AT8, AT5 specifications

Niles Audio, a renowned name in the audio industry, offers a range of exceptional in-wall and in-ceiling speakers designed to deliver high-quality sound without compromising the aesthetics of your living space. Among their outstanding offerings are the AT5, AT6, and AT8 models, each featuring unique attributes tailored to meet diverse listening preferences and installation environments.

The Niles AT5 is a compact yet powerful speaker that boasts a two-way design with a 5.25-inch woofer and a 1-inch tweeter. The AT5 is engineered to provide remarkable sound clarity and a balanced frequency response, making it ideal for small to medium-sized areas. Its shallow mounting depth facilitates easy installation, even in tight spaces. The speaker's sleek profile and paintable grille allow it to blend harmoniously with any interior décor, making it an excellent choice for homeowners seeking both performance and style.

Moving up the range, the Niles AT6 features a larger 6.5-inch woofer, enhancing its bass reproduction while maintaining detailed mid-range and treble frequencies. This model is well-suited for medium-sized rooms and can serve as part of a multi-room audio system. The AT6 incorporates Niles’ innovative technology, including a unique shallow enclosure design and a pivoting tweeter, allowing for directional sound customization. This feature is instrumental in optimizing the listening experience by directing audio toward the listening area.

At the top of the series, the Niles AT8 showcases an impressive 8-inch woofer that offers deep, rich bass response and powerful sound output. This model excels in larger spaces and is perfect for immersive home theater experiences. The AT8 also features advanced acoustic engineering, including optimized crossover networks and high-quality components to ensure minimal distortion and exceptional sound fidelity. Its robust construction and adjustable mounting system provide flexibility during installation.

All three models are part of Niles Audio's commitment to delivering premium sound experiences with aesthetic considerations. They are designed to integrate seamlessly into any home while offering superior performance. The speakers are also backed by Niles’ reputation for durability and reliability, ensuring they will provide outstanding audio performance for years to come. Whether you choose the AT5, AT6, or AT8, Niles Audio offers options that cater to various audio needs, ensuring an exceptional listening experience for every room in the house.