Niles Audio AT8, AT6, AT5 manual Installation Brackets, Frames Grilles Existing Walls

Page 24

Installation of Brackets, Frames and Grilles in Existing Walls

Installation of

Brackets, Frames

and Grilles in

Existing Walls

IMPORTANT: Before you cut into any wall, review the sections on running wire and speaker placement.

1.Drill a 1/8” pilot hole just barely through the wallboard or dry wall (1/2” to 5/8” deep in most homes) about an inch below the center of your proposed speak- er location (an inch to the side if you are mounting the speaker horizontally). BE VERY CAREFUL NOT TO DRILL THROUGH EXISTING WIRES, PIPES, OR STRUCTURE. IF YOU FEEL ANY EXTRA RESISTANCE AS YOU ARE DRILLING, STOP. Cut a piece of coat hanger equal to the width of the bracket. Bend the wire in half creating a right angle. Poke the “L- shaped” wire into the pilot hole and turn it

Figure 12

Figure 11

in a complete circle. If it turns freely, repeat the procedure from a hole about an inch above the center of your proposed speaker location (See Figure 11).

If the wires movement is obstructed by a pipe or cable, fill the hole (s) with spackle or other patching compound and try another location.

2.When determining the final location of the cutout keep in mind that the frame and bracket will extend beyond the cutout. Make sure that you do not place the edge of the cutout directly next to a stud. Locate the studs using a stud sensor or hand-knocking. Once you have deter- mined the correct position for the cutout, hold the supplied template up to the wall surface. Level the template in either the horizontal or the vertical position and

mark the wall with a pencil. Drill the four corners with a 1/4” drill bit.

3.If you are cutting a painted or wall papered drywall use a sheetrock or keyhole saw. Cut the hole with the saw at a 45 degree angle. That way,

15

Page 23 Page 25
Image 24
Page 23 Page 25
Contents D E L S Table of Contents Limited Warranty Niles Audio CorporationWarranty Registration Card Snap-in Baffle Assembly IntroductionAntiresonant Wave Bracing Front-Mounted Bass & Treble ControlsEasy Retrofit Installation in your Existing Home No-Strip Speaker TerminalBumpBack Woofer Magnet Moisture Resistant ConstructionDetach Here Page Installation Considerations Recommended Amplifier PowerIncorporating a Local Volume Control Speaker Wire Incorporating a Remote ControlInsulating the Wall Cavity Specifications Model AT8Model AT5 Speaker Placement Placement for Critical ListeningPlacement for Varying Listening Positions Placement for Home Theater Rear ApplicationsBoundary Effect Listening at Higher Volumes CleaningOperation Removing The SpeakerAdjusting the Tweeter Installing the GrilleSpeaker Placement Installation Fundamentals Running the Speaker Wire in New ConstructionSpeaker Phase Adjusting the Bass and Treble ControlsInstalling the Speaker Frame See FigureConcealing Speaker Wire in Existing Walls Location Page Installation Brackets, Frames Grilles Existing Walls Installation Fundamentals Installation Brackets, Frames ConstructionStage Two Before Paint Page Niles Audio Corporation

AT6, AT8, AT5 specifications

Niles Audio, a renowned name in the audio industry, offers a range of exceptional in-wall and in-ceiling speakers designed to deliver high-quality sound without compromising the aesthetics of your living space. Among their outstanding offerings are the AT5, AT6, and AT8 models, each featuring unique attributes tailored to meet diverse listening preferences and installation environments.

The Niles AT5 is a compact yet powerful speaker that boasts a two-way design with a 5.25-inch woofer and a 1-inch tweeter. The AT5 is engineered to provide remarkable sound clarity and a balanced frequency response, making it ideal for small to medium-sized areas. Its shallow mounting depth facilitates easy installation, even in tight spaces. The speaker's sleek profile and paintable grille allow it to blend harmoniously with any interior décor, making it an excellent choice for homeowners seeking both performance and style.

Moving up the range, the Niles AT6 features a larger 6.5-inch woofer, enhancing its bass reproduction while maintaining detailed mid-range and treble frequencies. This model is well-suited for medium-sized rooms and can serve as part of a multi-room audio system. The AT6 incorporates Niles’ innovative technology, including a unique shallow enclosure design and a pivoting tweeter, allowing for directional sound customization. This feature is instrumental in optimizing the listening experience by directing audio toward the listening area.

At the top of the series, the Niles AT8 showcases an impressive 8-inch woofer that offers deep, rich bass response and powerful sound output. This model excels in larger spaces and is perfect for immersive home theater experiences. The AT8 also features advanced acoustic engineering, including optimized crossover networks and high-quality components to ensure minimal distortion and exceptional sound fidelity. Its robust construction and adjustable mounting system provide flexibility during installation.

All three models are part of Niles Audio's commitment to delivering premium sound experiences with aesthetic considerations. They are designed to integrate seamlessly into any home while offering superior performance. The speakers are also backed by Niles’ reputation for durability and reliability, ensuring they will provide outstanding audio performance for years to come. Whether you choose the AT5, AT6, or AT8, Niles Audio offers options that cater to various audio needs, ensuring an exceptional listening experience for every room in the house.
Top Page Image Contents