6. Installation
6.5Installing Accessories/Inserting Chamber Accessories 6.5.1 Installing the Adjustable Footrest (Optional)
1 |
2 |
3 |
Fig. 20
•To install the optional footrest, unscrew the screws (1) using the No. 3 Allen key provided.
When installing the holder (2), ensure that the cutout faces downwards so that the support (3) can be hooked in.
•Attach the holders (2) for the footrest on the left and right to the front wall of the housing. To do so, use the Allen screws you used earli- er. Ensure that the screws are tight.
•Hook the footrest (3) into the installed holder according to individual requirements (height).
•Once installed, the user can adjust the height of the footrest at any time by relocating it (3) to the desired height on both sides in the holder (2).
Leica CM1950 – Cryostat | 25 |
