
|
| 9. Troubleshooting |
|
|
|
Problem | Causes | Remedies |
|
|
|
No or insufficient | Cooling system or electronic drive | Call technical service. |
refrigeration of the | defective. |
|
cryochamber |
|
|
|
|
|
Sliding window collects | Air humidity and room temperature | Comply with the requirements |
condensation | too high. | for the installation site. |
|
|
|
No or insufficient | Cooling system or electronic drive | Call technical service. |
refrigeration of the | defective. |
|
specimen |
|
|
|
|
|
Lamp does not work | Lamp defective. | Check lamp and replace it, if |
|
| necessary. |
| Switch defective. | Call technical service. |
Both disinfection LEDs flash | UV radiation provided by UV tube no |
alternately | longer sufficient. |
Replace UV tube following the manufacturer’s instructions.
Image of an | Contact technical service and |
appears due to fault to be rectified. | follow the instructions given. |
Leica CM1950 Cryostat | 51 |