Leica CM1950 manual Shelf, Movable Optional, Inserting the Section Waste Tray

6.Installation

6.5.2 Installing the Storage Systems (Optional)

2

Fig. 21

For reasons of

1accessibility, the (optional) storage system must always be installed first.

To do so, remove the insert (1), place the frame (2) in front of the bore and tighten the screws/ washers on the cryostat housing using the No. 4 Allen key. Afterwards, insert the insert (1) into the frame and fold it up.

1
2	3

Fig. 22

6.5.3 Shelf, Movable (Optional)

Attach the rod for the shelf to the inner front side of the cryostat housing using the provided screws (1) and the No. 3 Allen key, then attach the caps

(3). (The rear side of the movable shelf has white plastic screws (2) that prevent the interior of the chamber from being scratched.) Now hook the movable shelf into the guide rod.

6.5.4 Inserting the Section Waste Tray

Fig. 23

Before installing the knife/ blade holder base, insert the

section waste tray with the a

cutout (a) facing the user.

26 Operating Manual V1.1 – 05/2007