Innovative Design & Practical Features
Complete Visual Information
Three separate indicating LED's provide visual information: healthy mains supply, CO level sensed/alarm status, and if a fault is detected during the unit's integral
The alarm LED varies its rate of flash depending upon the CO level sensed - giving further information on any dangerous levels of CO.
Operating the test button will also activate the memory feature and the LED will indicate the previous maximum CO level sensed.
Kitemarked to
BS EN 50291:2001
All Ei CO alarms carry the British Standards Institute Kitemark to indicate that they have been 3rd party tested, by BSI, to
BS EN 50291:2001. This replaces the previous BS 7860:1996 and is a more demanding standard.
The main change to the standard is a lowering to the CO triggering levels combined with new time/response limits to protect more vulnerable people groups and alleviate false alarms.
Rechargeable Lithium Cells used in Ei261ENRC & Ei261DENRC Models
High performance rechargeable vanadium pentoxide lithium cells are used in the Ei261ENRC & Ei261DENRC alarms and offer the most effective and reliable
As the cells are rechargeable, they obviate the need for
battery replacement - saving both time and money. Also, due to them being an integral part of the internal circuitry, any possible casual removal is prevented.
Easi-fit Mounting Plate
(Ei261ENRC & Ei261DENRC)
The
With
1Fix the mounting plate supplied with the alarm to the ceiling or wall during first fix. No separate enclosure is required.
installation could not be simpler!
Wire the |
| Slide the alarm |
terminals on |
| into place. |
the base plate |
| There is no |
and clip on the |
| need for extra |
protective |
| connecting |
2cable cover. |
| 3leads or wiring. |
6