Hearth and Home Technologies DVP-FBHT specification

WARNING

Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:

•Installation and use of any damaged vent system component.

•Modification of the vent system.

•Installation other than as instructed by Hearth & Home Technologies.

•Installation and/or use of any component part not approved by Hearth & Home Technologies.

Any such action may cause a fire hazard.

4.Install the telescoping flue section included with the cap on the last section of flue pipe.

WARNING

Fire Hazard

Impaired performance of appliance

• Telescoping flue section of termination cap MUST be used when connecting pipe section to termination cap.

•Maintain a 1-1/2 inch minimum overlap on telescoping flue section of termination cap.

5.Remove the three bolts from the firebrick cap face to separate the firebrick part of the cap from the metal backplate (see Figure 1).

6.Slide the backplate, with the 8 inch collar on it, onto the flue pipe from the fireplace. For thinner wall construction, you may have to trim the heat shield on the metal backplate and interior wall shield firestop.

WARNING

Fire Risk

Exhaust Fumes Risk

Impaired Performance of Appliance

• Overlap pipe slip sections at least 1-1/2 inches.

•Use pilot holes for screws.

•Screws must not exceed 1 inch long.

•Pipe may separate if not properly joined.

NOTE: The heat shield on the interior wall shield firestop and the heat shield on the metal backplate must overlap 1-1/2 inches. If wall thickness does not allow the required 1-1/2 inch heat shield overlap, an extended heat shield must be used.

7.Secure the backplate to the wall with four appropriate length screws from the hardware pack.

8.Seal the backplate to the housewrap or sheathing. Follow housewrap manufacturer’s instructions for sealing a penetration when applicable.

9.Slide the firebrick part of the cap onto the backplate by aligning the 5 inch collar with the 5 inch flue pipe coming from the fireplace. Slide the two pieces together until the firebrick part bottoms out on the backplate.

10.Replace the three bolts removed in step 2. DO NOT OVERTIGHTEN THE BOLTS.

	Measure vertical
	clearances from
	this surface.
		Measure horizontal
		clearances from
		this surface.
	1 in.	7-3/16 in.
	(25)	7-3/16 in.
	(25)	(182)
		(182)
	14 in.
	(356)
	3/8 in. (9)
		1 in. (25)
		10-3/8 in. (264) Max.
		7-11/16 in. (195) Min.
		12 in.
		(305)
	Figure 2.

DVP-FBHT specifications

Hearth and Home Technologies has made a significant impact in the realm of home heating solutions, and one of their standout products is the DVP-FBHT. This innovative heating appliance is designed to enhance comfort in residential spaces while incorporating advanced technology and elegant design.

One of the primary features of the DVP-FBHT is its impressive heat output capability. The unit is engineered to provide efficient heating to larger areas, making it an optimal choice for both small and spacious homes. With heating capacities that can rival traditional heating systems, the DVP-FBHT ensures that rooms remain warm and inviting during colder months.

Incorporating cutting-edge technology, the DVP-FBHT utilizes direct venting, which allows for efficient combustion and minimizes heat loss. This system draws combustion air from outside the home, creating a safe indoor environment and improving overall air quality. The result is a highly efficient appliance that not only heats spaces effectively but does so with a lower environmental impact.

The DVP-FBHT is also equipped with advanced controls, providing users with the convenience of adjusting settings to suit their specific heating needs. The intuitive interface allows for easy operation, including programmable thermostats and remote control options, giving homeowners the ability to manage heat levels with precision.

Aesthetically, the DVP-FBHT does not compromise on style. It features a contemporary design that seamlessly fits into various home décors, offering choices in finishes and trim styles that appeal to a wide range of tastes. The large viewing area of the firebox allows for a captivating view of the flames, creating a cozy atmosphere in any living space.

Safety is paramount, and Hearth and Home Technologies has ensured that the DVP-FBHT meets stringent safety standards. With features such as tempered glass and safety shut-off systems, homeowners can enjoy the warmth and ambiance without compromising safety.

In summary, the Hearth and Home Technologies DVP-FBHT is a powerful, efficient, and aesthetically pleasing heating solution. With advanced technologies, user-friendly controls, and a design that fits seamlessly into any home, it stands out as a premier choice for those seeking reliable and stylish heating options. Whether it’s for a new build or a renovation, the DVP-FBHT promises to enhance comfort and create a welcoming environment.