HAZARD
RISK OF ELECTRICAL
SHOCK (cont’d)
WHAT CAN HAPPEN | HOW TO PREVENT IT |
REPAIRS ATTEMPTED BY UNQUALIFIED ANY ELECTRICAL WIRING OR REPAIRS PERSONNEL CAN RESULT IN SERIOUS REQUIRE ON THIS PRODUCT SHOULD BE
INJURY OR DEATH BY ELECTROCUTION. PERFORMED BY AUTHORIZED SERVICE CENTER PERSONNEL. IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES.
RISK FROM
FLYING OBJECTS
ELECTRICAL GROUNDING: FAILURE TO
PROVIDE ADEQUATE GROUNDING TO THIS PRODUCT COULD RESULT IN SERIOUS INJURY OR DEATH FROM ELECTROCU- TION. SEE GROUNDING INSTRUCTIONS.
THE COMPRESSED AIR STREAM CAN CAUSE SOFT TISSUE DAMAGE TO EXPOSED SKIN AND CAN PROPEL DIRT, CHIPS, LOOSE PARTICLES AND SMALL OBJECTS AT HIGH SPEED, RESULTING IN PROPERTY DAMAGE OR PERSONAL INJURY.
MAKE CERTAIN THAT THE ELECTRICAL CIRCUIT TO WHICH THE COMPRESSOR IS CONNECTED PROVIDES PROPER ELECTRI-
CAL GROUNDING, CORRECT VOLTAGE AND ADEQUATE FUSE PROTECTION.
ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES WITH SIDE SHIELDS WHEN USING THE COMPRESSOR.
NEVER POINT ANY NOZZLE OR SPRAYER TOWARD ANY PART OF THE BODY OR AT OTHER PEOPLE OR ANIMALS.
ALWAYS TURN THE COMPRESSOR OFF AND BLEED PRESSURE FROM THE AIR LINE
BEFORE ATTEMPTING MAINTENANCE, ATTACHING TOOLS OR ACCESSORIES.
RISK TO BREATHING
RISK OF FALLING
RISK FROM
MOVING PARTS
THE COMPRESSED AIR FROM YOUR COMPRESSOR IS NOT SAFE FOR BREATH- ING! THE AIR STREAM MAY CONTAIN CARBON MONOXIDE, TOXIC VAPORS OR SOLID PARTICLES.
SPRAYED MATERIALS SUCH AS PAINT, PAINT SOLVENTS, PAINT REMOVER, INSECTICIDES, WEED KILLERS, ETC.. CONTAIN HARMFUL VAPORS AND POI- SONS.
A PORTABLE COMPRESSOR CAN FALL FROM A TABLE, WORKBENCH OR ROOF
CAUSING DAMAGE TO THE COMPRESSOR WHICH COULD RESULT IN SERIOUS INJURY.
THE COMPRESSOR CYCLES AUTOMATI- CALLY WHEN THE PRESSURE SWITCH IS IN
THE ON/AUTO POSITION
NEVER INHALE AIR FROM THE COMPRES- SOR EITHER DIRECTLY OR FROM A BREATH- ING DEVICE CONNECTED TO THE COMPRES- SOR.
WORK IN AN AREA WITH GOOD CROSS- VENTILATION. READ AND FOLLOW THE SAFETY INSTRUCTIONS PROVIDED ON THE LABEL OR SAFETY DATA SHEETS FOR THE
MATERIAL YOU ARE SPRAYING. USE A NIOSH/MSHA APPROVED RESPIRATOR DESIGNED FOR USE WITH YOUR SPECIFIC APPLICATION.
ALWAYS OPERATE COMPRESSOR IN A STABLE SECURE POSITION TO PREVENT ACCIDENTAL MOVEMENT OF THE UNIT.
NEVER OPERATE COMPRESSOR ON A ROOF OR OTHER ELEVATED POSITION. USE ADDITIONAL AIR HOSE TO REACH HIGH LOCATIONS.
ALWAYS TURN OFF THE COMPRESSOR,
BLEED PRESSURE FROM THE AIR HOSE, AND UNPLUG FROM ELECTRICAL OUTLET BEFORE PERFORMING MAINTENANCE OR ATTACHING TOOLS AND ACCESSORIES.
MOVING PARTS CAN CAUSE SERIOUS INJURY OR DAMAGE IF THEY COME INTO CONTACT WITH YOU OR YOUR CLOTHING.
ATTEMPTING TO OPERATE OR REPAIR COMPRESSOR WITH PROTECTIVE SHROUDS REMOVED CAN EXPOSE YOU TO MOVING PARTS AND ELECTRICAL SHOCK.
DO NOT REMOVE THE PROTECTIVE COVERS FROM THIS PRODUCT. NEVER OPERATE THE COMPRESSOR WITH GUARDS OR COVERS WHICH ARE DAMAGED OR REMOVED.
ANY REPAIRS REQUIRED ON THIS PRODUCT
SHOULD BE PERFORMED BY AUTHORIZED SERVICE CENTER PERSONNEL.
RISK OF BURNS | TOUCHING EXPOSED METAL SUCH AS THE | NEVER TOUCH ANY EXPOSED METAL | ||
|
|
| COMPRESSOR HEAD OR OUTLET TUBE CAN | PARTS ON COMPRESSOR DURING OR |
|
|
| RESULT IN SERIOUS BURNS. | IMMEDIATELY AFTER OPERATION. COM- |
|
|
|
| PRESSOR WILL REMAIN HOT FOR SEVERAL |
|
|
|
| MINUTES AFTER OPERATION. |
|
|
|
|
|
TMPCPOL — 3/11/97
