Hearth and Home Technologies owner manual Model Everest, What to do if you smell gas

Page 1

Owner’s Manual

Installation and Operation

Model:

Everest

NOTICE

DO NOT DISCARD THIS MANUAL

• Important operating

• Read, understand and follow

• Leave this manual with

and maintenance

these instructions for safe

party responsible for use

instructions included.

installation and operation.

and operation.

DO DISCARDNOT

WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing property damage, personal injury, or death.

DO NOT store or use gasoline or other flam- mable vapors and liquids in the vicinity of this or any other appliance.

What to do if you smell gas

-DO NOT try to light any appliance.

-DO NOT touch any electrical switch. DO NOT use any phone in your building.

-Immediately call your gas supplier from a neighbor’s phone. Follow the gas suppli- er’s instructions.

-If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

This appliance may be installed as an OEM installation in manufactured home (USA only) or mobile home and must be installed in accordance with the manufacturer’s instructions and the manufactured home construction and safety standard, Title 24 CFR, Part 3280 or Standard for Installation in Mobile Homes, CAN/CSA Z240MH, in Canada.

This appliance is only for use with the type(s) of gas indicated on the rating plate.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

DO NOT touch glass until it is cooled

NEVER allow children to touch glass

Keep children away

CAREFULLY SUPERVISE children in same room as fire- place.

Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other flammable materials away.

This appliance has been supplied with an integral barrier to prevent direct contact with the fixed glass panel. DO NOT operate the appliance with the barrier removed.

Contact your dealer or Hearth & Home Technologies if the barrier is not present or help is needed to properly install one.

In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter.

See Table of Contents for location of additional Commonwealth of Massachusetts requirements.

Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies suggests NFI certified or factory trained professionals, or technicians supervised by an NFI certified professional.

Heat & Glo • Everest • 750-900 Rev. o • 10/08

1

Image 1
Contents What to do if you smell gas Model EverestSafety and Warning Information Table of Contents Part number list on following Service PartsStocked Service Parts ListAt Depot Standing Pilot Conversion Kits PreDescription High Altitude Installations Installation Codes1Approvals and Codes Appliance CertificationWarranty Pre-install Preparation2Getting Started Introducing the Heat & Glo Gas FireplacesDiagram of the Everest Locating the Fireplace 3Installing the FireplaceClearance Requirements Framing the FireplaceIdentifying Vent Components Installing the Vent System A. Vent System ApprovalsStraight Up Vertical Venting 40’ MAX .4 MVenting with ONE 1 90 Elbow Venting with TWO 2 90 Elbows Venting with three 90 elbows + V + HAssembling Vent Sections Installing Vent ComponentsInstall Support Brackets To Install the Heat ShieldCeiling Firestop Ceiling Side 12 Hole and Vent Pipe184 mm Vent TerminationMinimum Clearances for Termination Minimum Height from Roof to Lowest Discharge Opening Roof Pitch Min. FtA Fireplace Positioning, Leveling, and Securing the FireplaceGas Control Systems Intermittent Pilot Ignition IPI System Gas Pressure Requirements Gas Supply LinePressure Natural Gas Propane Optional Accessories Wiring the FireplaceWall Switch Sealant Material Atlas Surround Requirements FinishingHearth Extensions Placing the Rock Positioning the LogsPlacing the Ember Material Glass Specifications CeramicBattery Backup After the InstallationDouble-check for faulty components Before Lighting the Fireplace4Maintaining and Servicing Your Fireplace Fireplace MaintenanceContact Information

Everest specifications

Hearth and Home Technologies (HHT) is renowned for its commitment to innovation and quality in the hearth industry, and the Everest model exemplifies this ethos. Designed to redefine the traditional fireplace experience, the Everest is a blend of advanced technology, exceptional design, and a focus on user convenience.

One of the main features of the Everest is its impressive heating capacity. The fireplace is engineered to provide substantial warmth, making it ideal for larger spaces. With an output of up to 40,000 BTUs, the Everest can efficiently heat rooms while remaining visually striking. The larger viewing area, framed by a sleek design, offers an unobstructed view of the mesmerizing flames, creating a stunning focal point in any home.

The Everest is equipped with cutting-edge technology, including an advanced combustion system. This system ensures optimal fuel efficiency and reduced emissions, making it an environmentally friendly choice. The High-Definition glow and realistic flame patterns enhance the overall ambiance, providing a realistic fire experience without the hassle of traditional wood burning.

User control is a significant aspect of the Everest's design. It features a user-friendly remote control that allows homeowners to adjust the flame height, heat output, and even the ember bed color, tailoring the ambiance to suit any occasion. Smart home compatibility is another notable characteristic, enabling integration with home automation systems for seamless control.

Durability and craftsmanship are hallmarks of HHT products, and the Everest is no exception. Constructed from high-quality materials, it offers resilience and long-lasting performance. The unit is designed for easy maintenance, with features that simplify cleaning and upkeep, ensuring that it remains a centerpiece of comfort for years to come.

One of the Everest's standout attributes is its versatility in installation. It can be built into various types of structures, whether it's a traditional home or a modern setting, ensuring that it fits seamlessly into any interior design scheme. The customization options, including a range of trims and finishes, allow homeowners to personalize the look of their fireplace.

In summary, the Hearth and Home Technologies Everest is more than just a fireplace; it is a sophisticated heating solution that combines aesthetics, efficiency, and technology. With its powerful heating capabilities, advanced features, and flexibility in design, the Everest elevates the concept of home comfort to new heights, making it an excellent choice for discerning homeowners.