Memorex MP3207 operating instructions Playing Cassette Tapes, Stop/Eject

MP3207.O/M.QXD 3/26/03 10:20 AM Page 11

PLAYING CASSETTE TAPES

1
Press	the	STOP/EJECT	(■ )

button to open the cassette compartment.

2 ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Insert a pre-recorded cassette into the slots in the Cassette Door with the open end facing up and the full reel on the right side. Close the cassette door by pushing on the PUSH TO CLOSE area.

3

1

2

Press the POWER OFF/TAPE button ❶, then press the PLAY

( ) button ❷ to begin playback.

4
1	2

5
1	3

6

For an enhanced Bass sound, press the BASS BOOST button

❶. Adjust the VOLUME control ❷ as desired.

To advance or rewind the tape rapidly, press either the F.FWD

( ) ❶ or REWIND ( ) ❷ button. When you reach the desired point, press the PLAY ( ) button ❸ to resume normal playback.

To pause playback momentarily,

press the PAUSE ( ) button. The tape movement stops but the tape motor is still running. Press the

PAUSE ( ) button again to release pause and resume normal playback.

7

8

SELECTING TAPE FUNCTION The tape function can be selected by pressing the F.FWD ( )

button , REWIND ( ) button or

the PLAY ( ) button while the power is off.

To stop playback before the tape ends, press the STOP/EJECT (■)

button. The PLAY ( ) button is released and the tape motor shuts off.

When the tape reaches the end, the auto-stop mechanism

activates, the PLAY ( ) button is released and the tape motor shuts off. Press the STOP/EJECT (■) button to open the cassette compartment and remove the cassette.

11