MP3207.O/M.QXD 3/26/03 10:20 AM Page 5
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1 |
2 |
2 |
1 |
3 |
|
2 | 1 |
Press the TUNER Function button to turn the unit on and select the Tuner mode.
Press the AM/FM Band button ❶ to select AM or FM. Noise present in FM broadcasts can be reduced by pressing the REPEAT/FM MONO button ❷; “MONO” will appear in the display and the broadcast will be in mono.
Use the TUNING/Skip/Search Up
❶or TUNING/Skip/Search Down
❷ button to select the desired AM or FM station. When a strong FM Stereo signal is received, the FM Stereo ( 
) indicator will light.
Please make sure the MONO button is off, otherwise the Stereo indicator will not light.
4 |
|
2 | 1 |
5 |
|
1 | 2 |
6 |
If you press and hold the TUNING/Skip/Search UP ❶ or TUNING/Skip/Search Down ❷ button for one second, then release, the unit will automatically scan to the next broadcasting station.
For an enhanced Bass sound, |
| Press the POWER OFF/TAPE |
press the BASS BOOST button |
| button to turn the radio off. |
❶. Adjust the VOLUME control ❷ |
|
|
as desired. |
|
|
|
|
|
HINTS FOR BETTER RECEPTION
FM - Make sure that the telescopic FM Rod Antenna is raised and extended to its full length. You may have to vary the direction of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be necessary to turn the unit slightly so that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the position that provides the strongest reception for each of your favorite AM stations.
HEADPHONES JACK
For private listening, plug headphones (not included) into the Headphones jack. The speakers will be disconnected when the headphones are plugged in.
5