Log Set Assembly: GRL-700-AU-LOGS
Model:
LOG PLACEMENT INSTRUCTIONS u
STEP 1: Attach grate to as- sembly by sliding hooks into open- ings on the front surround.
STEP 2: Ensure that tabs on front and rear surrounds are bent as shown in Figure 1. Carefully remove logs from carton and place as shown.
PILOT
ASSEMBLY
BURNER
PIEZO
IGNITOR
GRATE
CONTROL
ACCESS
COVER
FRONT
SUROUND
REAR
SURROUND
FLEX TUBE
GAS
VALVE
Figure 1
ON/OFF SWITCH
1 | 2 | 5 | 6 |
3 4
CAUTION: Logs are fragile. Carefully remove the logs from the packaging.
NOTE: Overhead view and front view of burner, decorative front and surround.
7