Hearth and Home Technologies RUTHERFORD-50 owner manual Accessories, Gas Log/Lighter Provision

Page 45

13 Accessories

A. Gas Log/Lighter Provision

WARNING! Fire and/or Asphyxiation Risk! Use with solid wood fuel or decorative gas appliance only. Gas fire gener- ates fumes.

DO NOT install unvented gas logs

Damper must be locked fully open when gas logs are installed

A certified gas log lighter or decorative gas log set can be installed in this fireplace.

Maximum input is 150,000 BTU/hr.

Decorative gas appliance must be certified to ANSI Z21.60

 

“Standard for Decorative Gas Appliances for Installation

Firebox

Refractory

Seal with fireplace mortar or non-combust- ible sealant

Outer Shell

of Fireplace

Maintain air clearance to combustibles.

Combustible

Materials

in Vented Fireplaces”.

• Must be installed in accordance with the National Fuel

Gas Code, ANSI Z223.1.

• A gas log set must incorporate a gas shutoff.

• Gas log set requires the damper to be locked fully open.

• Knockouts are provided on both sides of the fireplace for

1/2 in. (13 mm) iron pipe.

• A locating dimple is located on both sides of the fireplace in

the molded brick panel for drilling a 1 in. (25 mm) diameter

hole for installation of a gas line. After the panel is installed,

Gas Line

Repack

Insulation

Knockout

Gas Line

4 in. (102 mm)

1 1/2 in. (38 mm) air space around

pipe

Combustible materials may be located at zero clearance to gas line beyond 4 in. (102 mm) from fireplace side.

drill the hole for the gas line.

• Seal panel around pipe with fireplace mortar or a non-

combustible sealant.

Figure 13.1 Gas Line Installation

B. Wood Burning Inserts

WARNING! Risk of Fire! Improper installation of wood inserts may cause fireplace or chimney system to overheat.

If a wood burning insert is being installed in this fireplace, Hearth & Home Technologies recommends full reline of the chimney.

Cooling air openings at the top of the chimney must not be obstructed in any manner.

Hearth & Home Technologies recommends securing the reline at the top of the flue and using the cap certified for use with this fireplace system.

Heat & Glo • RUTHERFORD-504059-333 Rev F • 11/08

45

Image 45
Contents RUTHERFORD-50 Listing Label Information/Location Homeowner Reference InformationTable of Contents Installer GuideUser Guide CONDITIONS, Exclusions & Limitation of Liability Warranty Hearth & Home Technologies Limited WarrantyHeat & Glo RUTHERFORD-50 4059-333 Rev F 11/08 Appliance Certification Listing and Code ApprovalsNon-Combustible Materials Combustible MaterialsYour Fireplace Operating InstructionsStarting a Fire Seasoned WoodGrate FirescreenVented Gas Log Sets & Gas Log Lighters Glass DoorsOptional Components Clear SpaceHardwood vs Softwood Wood FuelMaintainance and Service Chimney Inspection/CleaningDisposal of Ashes Glass Cleaning Check Firebox Molded Brick PanelInspect Grate Start Fire Problems Possible Cause Solution Troubleshooting GuideTypical Fireplace System Getting StartedDesign and Installation Considerations DraftNegative Pressure Recommended Chimney Locations Locating your Fireplace & ChimneyTools and Supplies Needed Typical Fireplace ComponentsInspect Fireplace and Components Select Fireplace Location Framing & ClearancesAir Space Clearances ClearancesFrame the Fireplace Sidewalls/SurroundsThings to Consider Installation of FireplacePosition the Fireplace Place Protective Metal Hearth StripsOutside Air Inlet Locations Install Outside Air KitChimney Assembly Height of Chimney Components Chimney RequirementsInstall Firestop Installation NotesFrame Openings Cut Roof OpeningSupplementary Support and Stabilizer Assemble Chimney SectionsInstall Roof Radiation Shields Install Attic Insulation ShieldOffset Elbow Installation Finish TopEnclosures Flat Roofs Chimney Termination RequirementsConstruct the Chase Chase InstallationsInstall Fireplace & Chimney Install Chase Top FlashingInstall Termination Cap Shroud Requirements ShroudsHouse Style Shroud House Style Shroud Minimum DimensionsPyramid Style Shroud Arch / Mailbox Style ShroudInstall Hearth Molded Brick Panel Installation of Molded Brick PanelInstall Side Molded Brick Panel-Traditional Install Back Molded Brick Panel-TraditionalInstall Back Molded Brick Panel-Herring- bone Install Side Molded Brick Panel-Herring- boneInstall Screens Install MortarFinishing Hearth Extension= 1/k x inches of thickness Raised Hearth Extension Framing Non-combustible Sealant Noncombustible Facing Finishing MaterialCombustible Mantel 12 Notch the Metal Track Mantel, Adding Extra SupportBrick Front Accessories Gas Log/Lighter ProvisionWood Burning Inserts Reference Materials Fireplace DimensionsCatalog # Description Chimney ComponentsRUTHERFORD-50 PartsThis page intentionally left blank This page intentionally left blank This page intentionally left blank Do not Discard this Manual

RUTHERFORD-50 specifications

Hearth and Home Technologies (HHT) has long been recognized for its innovative approach to home heating solutions, and the Rutherford-50 is a shining example of their commitment to quality and performance. This versatile fireplace is designed to not only provide warmth but also enhance the aesthetic appeal of any living space.

The Rutherford-50 is a gas-fired fireplace that effortlessly combines modern technology with traditional design. One of its standout features is the large viewing area, which allows for an unobstructed view of the flames, creating an inviting focal point in any room. With its clean lines and elegant design, it complements various interior styles, from contemporary to rustic.

A major advantage of the Rutherford-50 is its advanced ignition system. Utilizing electronic ignition technology, it ensures reliable and quick starts, enhancing user convenience, especially during cold weather. The fireplace also includes a user-friendly remote control, allowing homeowners to adjust heat output and flame settings with ease.

Efficiency is a key characteristic of the Rutherford-50. The fireplace boasts an impressive thermal efficiency rating, ensuring that it effectively heats the room while minimizing energy consumption. This not only helps in reducing utility bills but also contributes to a more environmentally friendly home heating solution.

The Rutherford-50 also emphasizes safety and functionality. It features a built-in safety pilot, which automatically shuts off the gas flow if the flame goes out, providing peace of mind for families. Additionally, the fireplace is equipped with a barrier screen to prevent accidental contact with the flames, making it suitable for homes with children and pets.

Customization options are another attractive aspect of the Rutherford-50. Homeowners can choose from various decorative features, including different media options like logs, rocks, or glass, allowing them to personalize their fireplace to fit their unique style.

In summary, the Hearth and Home Technologies Rutherford-50 is a sophisticated gas fireplace that marries style and functionality. With its large viewing area, advanced ignition system, impressive efficiency, and customizable options, it represents a remarkable choice for anyone looking to enhance their home heating experience. Whether for warmth or ambiance, the Rutherford-50 provides an unparalleled solution that aligns with modern living.