Installation, Connections, Placement | Niles Audio ZR-4630s guide

INSTALLATION

PLACEMENT

Place the ZR-4630 on a flat, level surface such as a table or shelf, with its weight equally distributed on each of its four feet. Placing the weight of the amplifier on the rear or front panel for even an instant will result in damage to the amplifier's connectors and controls.

Like any high-fidelity component, the ZR-4630 will last much longer if it is given adequate ventilation for proper cooling. When installing the ZR-4630 in a cabinet, be sure that the cabinet’s rear is open to receive fresh air in order to provide proper cooling (see Figure 28). If the cabinet’s design does not accommodate an open rear, install two small “boxer fans” to provide continuous airflow into and out of the cabinet (see Figure 29). Place the ZR-4630 so it has at least seven inches of free air space above it. If the amplifier is located on a carpeted surface, place a board under the amplifier’s feet. Do not block the ventilation holes on the top and bottom of the ZR-4630.

Boxer Fan (55 CFM) directly centered 7” on top of the ZR-4630.

Boxer Fan (55 CFM) directly centered 2” behind the ZR-4630.

Figure 28

Make sure that there is a minimum of 7” of free air space above the amplifier and 3” on each side for proper ventilation.

Allow a minimum of 2” of depth behind unit to accommodate cables and connectors.

CAUTION! When using low- impedance speaker loads (less than 8 ohms Nominal) refer to Figure 29 for proper placement.

Figure 29

If the cabinet rear is not open to fresh air or if you’re using low-impedance loads, install two “boxer fans” to provide continuous air flow into and out of the cabinet.

CONNECTIONS

Speaker Wire Connections

CAUTION! All speaker wire connections must be made with the amplifier OFF.

Banana Plugs

There are many types of banana plugs available. Some are crimped onto the speaker wire and some are soldered.Niles offers banana plugs that have a quick-connect binding system for the speaker wire included within the banana plug itself. After the wire is attached, the banana plug is sim- ply inserted into the hole at the end of the amplifi- er's speaker binding post. Dual banana plugs will fit the binding posts.

Bare Wire

Unscrew the red or black plas-

tic knobs and insert the bare
wire through the hole in the	Figure 30
post. Tighten the knob until the	Figure 30
wire is securely clamped.

ZR-4630s specifications

The Niles Audio ZR-4630 is a powerful multi-room audio distribution system that caters to various audio needs, making it an excellent choice for both residential and commercial settings. This versatile unit is designed to provide seamless control of audio sources throughout multiple zones, allowing users to enjoy their favorite music in different areas of their home or business without compromising sound quality.

One of the standout features of the ZR-4630 is its ability to handle a wide range of audio sources. It supports up to six separate audio sources, which means users can enjoy music from different devices simultaneously. Whether it's streaming from a digital music service, playing CDs, or using a radio, the ZR-4630 accommodates any audio source you wish to incorporate. This flexibility ensures that everyone can have access to their favorite tunes, no matter where they are.

In addition to its source handling capabilities, the ZR-4630 utilizes sophisticated amplification technologies. The unit is equipped with a powerful built-in amplifier that delivers high-quality audio output. With a total power output of 30 watts per channel, it provides ample volume for each zone, ensuring that every listener hears the music clearly, regardless of their location.

Another notable characteristic of the Niles ZR-4630 is its user-friendly interface. The system comes with an intuitive control interface that allows users to easily select their desired audio source and adjust volume levels for specific zones. This feature is particularly beneficial in larger homes, where multiple zones are often in use simultaneously. With the optional Niles keypads, users can conveniently control the system from various locations throughout their property, enhancing the overall experience.

The ZR-4630 also supports advanced technologies such as IR control, allowing for seamless integration with universal remote systems. This means users can control their entire audio environment from a single device, simplifying the control process and enhancing user experience. Additionally, the unit supports a variety of connection options, including speaker-level and line-level outputs, ensuring compatibility with various speaker systems.

In summary, the Niles Audio ZR-4630 is a robust and versatile multi-room audio distribution system that excels in performance and user experience. With its ability to support multiple audio sources, powerful amplification, and intuitive controls, it stands out as an ideal choice for anyone looking to create a comprehensive audio environment in their home or commercial space. Whether for entertaining guests or simply enjoying personal music preferences, the ZR-4630 delivers high-quality audio to every corner of your space.