Contentsintroduction, General Safety, Information

CONTENTSINTRODUCTION

INTRODUCTION/WARRANTY	2
SAFETY	2-3
INSTALLATION	5-4
OPERATION	4
ELECTRICAL	4-5
MAINTENANCE	5
SERVICE	6-7
PARTS	8

Please read our instructions before you install and use your new pump; this will help you obtain full value and good ser- vice from it. It will also help you avoid needless service costs that result from causes we cannot control and cannot cover

in our warranty.

GENERAL SAFETY

Carefully read and follow all safety instructions in this

manual or on pump.

This is the safety alert symbol When you see this symbol on your pump or in this manual, look for one

of the following signal words and be alert to the potential for personal injury!

_	warns about hazards that will cause serious

personal injury, death or major property damage ff ignored.

['_ WAFININGIwarns about hazards that will or can cause se-

rious personal injury, death or major property damage if ig- nored.

It, CAUTIONIwarn s about hazards that will or can cause

minor personal injury or property damage if ignored.

The word NOTICE indicates special instructions which are

important but not related to hazards.

Electrically powered surnp pumps normally give many years of trouble-freeservice when correctly installed, maintained,

and used. However, unusual circumstances (interruption of

power to the pump, dirt/debris in the sump, flooding that ex-

ceeds the pump's opacity, electrical or mechanical failure in

the pump, etc.) may prevent your pump from functioning normally. To prevent possible water damage due to flooding,

INFORMATION

consult your local Sears store about installing a secondary sttmp pnmp or a DC backup sump pinup. See "Service', Page

6, for information about common sump pump problems and remedies.

1.To avoid risk of serious bodily injury and property dam-

age, read safety instructions carefully before installing pump.

2.Follow local and/or national plumbing and electrical codes when installing pump.

3.[&WARNING]To avoid fatal shocks, proceed as fol-

lows if pump needs servicing:

A.Disconnect power to pump outlet box before

pulling pump cord plug. After plug is pulled, let

pump cool for 20 minutes before attempting to work

on it. Modern motors may operate at high tempera-

HIFeS.

B. Take extreme care when changing fuses. To re-

duce the chance of fatal electrical shocks, DO NOT stand in water or put your finger in the fuse socket.

C. Ground the electrical outlet box.

D.Use only an individual branch circuit with a

Ground Fault Circuit Interrupter (GFCD protected

grounded outlet for cord plug.

390.30579, 390.305001, 390.30479 specifications

The Sears 390.30479, 390.305001, and 390.30579 are three models that exemplify the brand's commitment to quality and innovation in home appliances. These models are popular choices among consumers seeking reliability and performance in their everyday use.

One of the standout features of the Sears 390 series is its energy efficiency. Each model is designed to meet strict energy consumption standards, allowing consumers to enjoy their appliances while minimizing their environmental footprint. With advanced insulation materials and energy-saving technology, these models help reduce electricity costs while maintaining optimal performance.

Another defining characteristic is the user-friendly design. The Sears 390 series boasts intuitive controls and interfaces that allow users to easily operate the appliances, making them accessible for everyone, regardless of their experience level. The layout of control panels is logical and straightforward, offering quick access to different settings and features.

Durability is a hallmark of the Sears 390 models. Manufactured with high-quality materials, these appliances are built to withstand the rigors of daily use. Whether handling heavy loads or enduring constant operation, the robust construction ensures longevity and reliability, providing consumers with peace of mind regarding their investment.

In terms of performance, each model is engineered to deliver exceptional results. The 390.30479 is known for its powerful motor that can handle a variety of tasks efficiently. The 390.305001 features advanced technology that enhances its drying capabilities, ensuring clothes come out perfectly dry and fresh. Meanwhile, the 390.30579 offers versatile settings that cater to different fabric types, providing tailored care for garments and extending their lifespan.

Sears has also incorporated technology that enhances user experience. Features such as built-in diagnostic systems help troubleshoot issues quickly, reducing downtime and increasing convenience. Additionally, some models in the series may include connectivity options, allowing users to control and monitor their appliances remotely, which meets the needs of the modern consumer.

Overall, the Sears 390.30479, 390.305001, and 390.30579 stand out in the competitive home appliance market due to their blend of energy efficiency, user-friendly design, durability, and advanced performance technologies. These models are well-suited for families and individuals looking for dependable and effective solutions to enhance their home routines.