Sears RO 2000 manual Prepare Mounting HOLE, Assemble Faucet and Install

Page 7

- HOW TO INSTALL YOUR HOME DRINKING WATER SYSTEM -

INSTALL THE DRAIN ADAPTER

•Use FIG. 3 and the following guides.

Note: Consult a plumber if you are not familiar with plumbing procedures•

1.Use a ferrule and nut to assemble the drain

tubing connector to the drain adapter. Turn the connector to about 45 ° from the 12:00 position, as shown (to 10:00 or 2:00 position). Tighten the nut securely.

2.Carefully disassemble the sink drain pipe and clean the tailpiece to assure a leak-tight fit•

ferrule O

3.Install the drain adapter onto the sink tailpiece, using a ferrule and nut. Snug the nut, but do not tighten.

Note: If needed, to make fit, you can cut to shorten the unthreaded end of the adapter. Do not cut too short so the adapter will make a leak-tight seal with the connecting fitting.

4.Assemble the p-trap to the drain adapter, and other drain pipe fittings as required (check codes) to complete the drain run.

5.Tighten all connections.

 

drain

adapter

 

 

ferrule

 

 

 

_

o

 

 

nut

45 //

cut, if2 t

_

I

needed

drain tubing

 

connector

STEP 3 u PREPARE MOUNTING HOLE, ASSEMBLE FAUCET AND INSTALL

A. PREPARE MOUNTING HOLE.

1.Pick 1 of the following places for the faucet where it will fit flat against the surface. Be sure you have room underneath for the tubing connections (FIG. 7, page 10).

•..in a hole already in the sink (enlarge to 1-1/4" diameter if needed) to use for an extra faucet or spray.

...drill a hole (1-1/4" diameter) in the sink top.

CAUTION: TO AVOID DAMAGING A SINK

BEYOND REPAIR, CONSULT A QUALIFIED

PLUMBER OR INSTALLER FOR GUIDES BEFORE DRILLING HOLES IN PORCELAIN OR STAINLESS STEEL.

•..drill a hole (1-1/4" diameter) in the countertop next to the sink.

2.Drill the mounting hole.

3.Place plumbers putty around the edge of the hole to prevent water leakage around the faucet base.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents WaterWorks TM Table of Contents What Your Home Drinking Water System will do Safety GuidesElectronic Monitor Saddle Things to Check Before YOU Start to InstallHome Drinking Water System Installed Under Kitchen Sink Parts ShippingSANITIZING, Pressure TESTING, Placing in Service Steps to Install the SystemRemote Location -- You can install the RO Install the Cold Water Supply Saddle VALVE,AN Electric Drill Water Supply Saddle Valve HOW to Install Your Home Drinking Water SystemInstall the Cold Water Supply Saddle Valve FIG Install the Drain AdapterPrepare Mounting HOLE, Assemble Faucet and Install Use in step Assemble Faucet and InstallScrew All the way onto the 1/4 barb fiting on the faucet Make ELECTRICAL, and Remaining Tubing ConnectionsBOX SANITIZING, Pressure TESTING, Placing in ServiceChlorine Will Destroy MEM HOW Your Home Drinking Water System WorksImportant Purging Instructions PrefilterFaucet The sinktop or countertop faucet Care of Your Home Drinking Water SystemTo Replace the Postfilter To Replace the Prefilter CartridgeServicing the Bladder Place Where Clean and SanitaryTo Replace Flow Control and Screen To Replace the RO CartridgeSupport Marko-ring Automatic Shutoff ServiceDo the Sanitizing and Purging PRO CEDURES, ArrowModel RO 2000 with Monitor RO Care GuideURE Dimensions / Specifications\ I Repair PartsKEY Part Description Number KEY Part NO. NumberDescription of Part All of , pages 6 Remote Installation Location

RO 2000 specifications

The Sears RO 2000, released in the late 1980s, marked a significant advancement in the realm of personal appliances and home technology. As a state-of-the-art product in its category, the RO 2000 offered a blend of innovative features designed to enhance user convenience, functionality, and efficiency.

One of the standout characteristics of the Sears RO 2000 was its compact design. Tailored for modern households, the appliance seamlessly integrated into various kitchen layouts without sacrificing space. Its sleek and contemporary aesthetics rendered it a perfect match for any decor, appealing to a broad audience of consumers.

The RO 2000 boasted multiple functionalities, including the ability to perform tasks such as baking, broiling, roasting, and heating. This versatility made it a valuable addition to homes where time-efficiency is vital. Users appreciated the appliance's capacity to prepare meals quickly while maintaining high-quality results, showcasing Sears' commitment to versatility in home technology.

In terms of technology, the Sears RO 2000 featured advanced heating systems that delivered consistent and even cooking results. Utilizing a combination of convection heating and radiant elements, the appliance ensured that food was cooked evenly and retained moisture. This was particularly advantageous for baking enthusiasts who desired perfectly risen cakes and evenly browned casseroles.

The appliance also incorporated user-friendly controls, making it simple for anyone to operate. With easy-to-read dials and pre-set cooking options, it demystified the cooking process, allowing even novice cooks to achieve professional results. The RO 2000’s intuitive interface contributed to a positive user experience, as it streamlined the cooking process and reduced the likelihood of errors.

Another highlight of the Sears RO 2000 was its energy efficiency. With increasing awareness about energy consumption, the appliance was designed to minimize electricity usage while delivering powerful performance. This feature resonated well with environmentally-conscious consumers looking to reduce their carbon footprint without compromising on convenience.

Safety was also a priority in the design of the RO 2000. Equipped with features like automatic shut-off and cool-touch exteriors, users could operate the appliance with peace of mind, reducing the risk of accidents in the kitchen.

In conclusion, the Sears RO 2000 emerged as a landmark technology in household appliances, combining advanced cooking capabilities, user-friendly design, and energy efficiency. It represented a commitment to quality and innovation, positioning Sears as a leader in the home appliance market during its time. As families sought enhanced cooking solutions, the RO 2000 stood out as a reliable partner in creating delicious meals and fostering a love for cooking.
Top Page Image Contents