Sears 625.348234 = SET Time of Backwash, Clarifier Filter, NEUTRALIZER/TASTE & Odor Filters

Page 8

SECTION 1

WATER FILTER START-UP

I

1 D.PROGRAM THE TIMER

3.SET DAYS OF BACKWASH

IF YOU HAVE A WATER SOFTENER OR

OTHER AUTOMATIC FILTER, .. A good water flow rate is needed for proper recharging

and/or backwashing of all water conditioners. To help assure good water flow, you should

offset the timers on each conditioner so recharges do not occur on the same days, or at the same time.

•..Most Sears water softeners are factory set (many

are adjustable ) to recharge from 2:00 to 4:00 am.

•• • Set the filter to backwash on different days, or...

•• • Set the filter to backwash either before or after

other equipment, or...

... Offset the timers on all equipment to J29.g_

recharges on backwashes at 12:00, 2:00 and 4:00 AM, or 1:00, 3:00 and 5:00 AM, etc.

=SET TIME OF BACKWASH

The filter is factory set to begin backwashes at

12:00 AM, ending at about 12:40 AM. If a different backwash time is desired, or needed (see note under step 3), do the following•

a.Press the BACKWASH TIME button [] once, to display a flashing 12:00 AM, the factory setting•

b.Press the SET/CLEAR buttonl_]untilthe desired backwash starting time shows in the display.

NOTE: Press button [] and quickly release to move the display ahead 1 hour at a time. Or, hold button [] to move the display ahead 2 hours each second.

C. Press button [] to return the present time.

a.Read the BACKWASHING GUIDE for your type of filter.

b.Press the BACKWASH DAY BUTTON [] AND SUnday begins to flash.

If you want backwashes on Sunday (from guide), press the SET/CLEAR button [] to display ON.

If you do not want Sunday backwashes, press button [] to display OFF.

NOTE:

The timer is factory programmed to backwash on Monday, Wednesday and Saturday•

C.Press button [] again to display a flashing MOnday__ As you did in step b above, press button 141to display ON for backwash on Mon- day, or OFF for no backwash on Monday.

d.Press button [] for every day of the week, each time using button [] to display ON (for back- wash) or OFF (no backwash) as needed.

e.After setting ON or OFF for Saturday, press

button [] to return the present time in the display.

BACKWASHING GUIDE

CLARIFIER FILTER

The clarifier needs backwashing when you can see sediments in the water, or when faucet water pressure drops. When that happens depends on how much sediment is in the water supply,and how much water your household uses. You can use the following table as a guide.

WATER CONDITION

BACKWASHES PER WEEK

normal

sediments,

dirt, etc.

1

normal sediments,

_i_, etc.,

2-3

 

WITH iron

 

high

sediments,

dirt, etc.

2

high

sediments,

dirt, etc.,

3-4

WITH iron

NOTE:

The timer is factory programmed for Monday, Wednesday and Saturday recharge.

NEUTRALIZER/TASTE & ODOR FILTERS

The filter mineral bed will trap and hold some dirt, sediments, iron, etc., that may be in your water supply. To flush them from the mineral bed, 1

backwash each week is recommended. Back- wash also stirs the mineral bed which helps to keep water flowing through the entire bed instead of forming a channel.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ARS Save this ManualFacts and Figures to Keep WarrantyInstallers Contents Servicers Tech InformationFilter Start UP HOW Your Water Filter WorksSection LB. Check List of ALL Step by Step Guides to Install Water Filter START-UPSection Sanitizing the Water FilterSET Present DAY of Week Program the TimerSET Time of DAY = SET Time of Backwash Clarifier FilterSET Days of Backwash If YOU have a Water Softener or NEUTRALIZER/TASTE & Odor FiltersFace Plate Timer Features Error CodeBackwash NOW Hold Backwash NOWFlashing display is to remind you to reset the timer 2A.FACE Plate Timer Features2B.FILTER Applications Clarifying Filter Neutralizer FilterTaste & Odor Filter Filtered Water SERVICE, and Backwash Service BackwashClarifier Filter Taste and Odor FilterCAR,OF YOURR,TER Keep the Filter from Freezing3B. Adding MINERAL.. Neutralizer Steps to ADD MineralReturn the plumbing bypass valves to SERV- ICE position 3B. Adding MINERAL... Neutralizer FilterSteps to Replace Mineral 3C. Replacing MineralProblem Cause Correction Filter will not BackwashDIMENSIONS/SPECIFICATIONS Bypass Valves SINGLE-PLASTIC DIAValve Clarifier Neutralizer Taste & OdorServicers TECH. Information Wiring SchematicFace Plate Timer Electrical ConnectionsSERVICERSTECH. Information Backwash Cycle TimesDoes Press until 405 shows 1888 Shows 1to Return PresentDiagnostics Automatic Electronic Diagnostics Manual Advance DiagnosticPossible Defect Tion occurs, anIowerokayi Rotary Valve Service DisassemblyAssembly Servicing the ValveBackwash Cycle Fast Rinse Cycle 5F. Water Flow Through the Filter Valve Service CyclePosition Switch KEY Part Number Description Section Parts List KEY Part NO. Numbefdescription31 7133008 Motor 63 7070412 Screw, #4-24 x 1-1/8800 366 For in-home major brand repair service ARS Kenmore

625.348234, 625.348241, 625.348251 specifications

The Sears 625.348251, 625.348241, and 625.348234 are a series of innovative products that exemplify Sears' commitment to quality and functionality. These models, while unique in their own right, share several core features and technologies that reflect the brand's dedication to enhancing user experience.

One of the standout features of these models is their ergonomic design, which enhances comfort during use. The lightweight structure makes them easy to maneuver, further increasing their practicality for various applications. Additionally, the design incorporates anti-slip materials, ensuring a secure grip, even in slippery conditions.

In terms of technology, these models are equipped with advanced functionality that is tailored to meet diverse consumer needs. For instance, integrated smart technology allows for greater versatility, as users can connect their devices seamlessly. This feature not only enhances productivity but also incorporates user-friendly interfaces, making operation straightforward for all skill levels.

Another significant aspect of the Sears 625 series is its durability. Constructed from high-quality materials, these models are built to withstand regular wear and tear. The robust design ensures that they remain operational even under demanding conditions, which is particularly beneficial for users who rely on dependability in their tools.

Safety features are paramount in the design of these models. Each unit is equipped with advanced safety mechanisms designed to minimize the risk of injury. These include automatic shut-off functions and protective guards that ensure users can operate the tools with peace of mind.

Performance is a critical characteristic of the Sears 625 series. The models boast powerful engines that deliver consistent output, allowing for efficient operation across various tasks. Whether used for home improvement or professional applications, these products provide the reliability and effectiveness that users have come to expect from Sears.

In summary, the Sears 625.348251, 625.348241, and 625.348234 models stand out as an excellent option for consumers seeking quality, performance, and safety. Their innovative design, advanced technology, and focus on user comfort make them a valuable addition to any toolkit. Sears continues to uphold its legacy of excellence with these models, providing products that are not only practical but also durable and user-friendly.
Top Page Image Contents