PRECAUTIONS:
1.Read the following precautions and Installation instructions completely before beginning InstaUatlon. Please note that this system should be Installed In accordance with local laws and regulations.
2, This water filter is for use on COLD
_._,Hot water may damage the system. Maximum temperature Is 100° F (38 ° C).
3, Protect the water filter and tubing from freezing temperatures. Failure to do so can cause damage and void warranty.
4.This system must be installed on
mlcrabloloaicallv safe water.
STARTUP
1, Compare box contents with major par_s list. [See Figure 1.) Please Note: The Filter is installed, ready for use.
2.Install the 2 AAA batteries In the
bottom of the Filter Base assembly, Please note how batteries are to be
insta{led by looking at diagram
Figure 3 | Figure 4 |
molded into battery compartment, Failure to properly InstaLlbatteries can seriously damage the system,
3, Remove the existing faucet aerator
by unscrewing, if the faucet aerator Is difficu[t to remove, a pair of pliers with padded Jaws may work.
(See Figures 3 & 4.)
4, Remove the protective foam wrap from the diverter. Please note that
there are two gaskets provided with the dlverter. Use the thick gasket.
Thread the Dlverter Valve onto the
faucet
B.) Do not overtlghten! Overtlghten-
ing can damage the threads. If the dlverter will not thread on properly, use the thin gasket, If the Diverter
Valve is not compatible, an Adapter
and Gasket Kit is provided to obtain a proper fit, (See Figure 1.)
B. To run water through the filter, turn on the COLD WATER faucet and slide the
dlverter mechanism. To stop the flow, turn off the cold water faucet or slide
the diverter mechanism in the oppo-
site direction. [See Figure 6,)
Figure 5 | Figure 6 |
Page 3