HOW TO START
•WARNING
Personal Injury and Product Damage Hazard
. DO NOT plug in if switch is in ON position. Personal injury or damage could result.
. The cord moves rapidly when rewinding. Keep children away and provide a clear path when rewinding the cord to prevent
personal injury.
•DO NOT use outlets above counters, Damage to items in
surrounding area could occur.
Cord |
|
|
|
|
|
Rewind | 1. Pull | cord | out | of | |
Bar | |||||
| canister | to | desired | ||
| length. | The | cord | ||
| will | not | rewind | until | |
| the | cord rewind |
| ||
| bar | is pushed. |
| ||
NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug, one blade is wider than the other, This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug, If it still does not fit, con- tact a qualified electrician to install the prop- er outlet, Do not change the plug in any way°
2.Plug the polarized power cord into a 120 Volt outlet located near the floor,
To rewind: Unplug the cleaner. Hold the plug while rewinding to prevent damage or injury from the moving cord. Push cord rewind bar.
Pile Height
Indicator
Handle Release
Pedal
3.Lower wand from upright position by pressing on the handle release pedal
4.Select a pile height setting by pressing the sma!l pedal on the rear of the POWER-
MATE TM. The pile height setting shows on the indicator. See SUGGESTED PILE
HEIGHT SETTINGS.
Select a switch position on the handle°
OF
O_
J
OFF
FLOOR - turns on the canister motor only.
CARPET - turns on both the canister and the