Wet Nozzle, Latches Nozzle Body Removable Insert

SP6570 16 gallon detach 12/8/04 8:47 AM Page 14

Maintenance continued)

Wet Nozzle

To pick up liquids off a smooth surface, use the 2-1/2 inch wet nozzle accessory supplied with your wet/dry vac. To use this nozzle, simply attach the nozzle to the end of an extension wand.

Connect a second extension wand to the first, and connect the 2-1/2 inch x 7 foot hose to the extension wand.

Liquids may be picked up by dragging the nozzle across the surface. The squeegee will dry the surface as you vacuum.

Replacement rubber for the squeegee nozzle may be obtained through Sears Parts. If the rubber becomes worn, it may be flipped over for use on the opposite side or replaced. (Replacement service part #822256). To reverse or replace the squeegee:

1.Lay the wet nozzle on a flat surface with the round inlet opening facing up and the two latches close to you as shown.

Latches

Nozzle

Body

Removable

Insert

2.Using both hands, position each thumb on the removable insert, (below the latches) and two fingers of each hand on each latch, lift and disengage the two latches from the tabs on the nozzle body.

3.Gently pull the latches toward yourself to remove the insert.

To reinstall the removable insert cor- rectly, follow these steps:

1.Place the removable insert on a flat surface with the pins positioned upward and the latches close to you as shown. Place the rubber squeegee on the insert, with the pins fitting through the matching holes in the

squeegee. (Make sure the new work- ing edge is located farthest from you.)

2.Using both hands, lower the nozzle body onto the insert and squeegee with the round opening of the nozzle closest to you. With fingers on the far side and thumbs holding the latches of the removable insert, flip the nozzle over so the latches are on the top and the round inlet opening is facing away from you. Make sure the squeegee stays on the insert pins.

3.Press down with each thumb below the latching tabs until you see and hear the removable insert snap into the nozzle body. Snap the latches over the locking tabs into their original posi- tion.

4.Inspect the pins of the insert to make sure they fit through the holes of the squeegee and fit into the matching slots in the nozzle body.

NOTE: If the pins are out of position, hold the nozzle assembly with both hands and gently twist in opposite directions. The insert pins should snap into proper posi- tion.

Twist	Twist
Backward	Forward

The wet nozzle assembly is ready for wet pickup use.

113.17066 specifications

Sears 113.17066 is a versatile and reliable lawn mower introduced to meet the needs of homeowners looking for a practical solution for lawn care. This model is part of Sears' extensive line of outdoor power equipment, known for its durability and efficiency.

One of the standout features of the Sears 113.17066 is its powerful engine, which provides ample horsepower to tackle various lawn sizes and terrains. With a dependable four-stroke engine design, this mower delivers consistent performance, ensuring that users can achieve a clean, even cut with minimal effort. The engine's configuration also promotes fuel efficiency, allowing for longer mowing sessions without frequent refueling.

Equipped with a self-propelled system, the Sears 113.17066 takes the strain out of mowing, making it ideal for users of all ages and physical abilities. The self-propel capability allows the mower to move at a steady pace, reducing fatigue and enabling the operator to focus on maneuvering and cutting precision. This feature is particularly beneficial when handling sloped or uneven terrains, ensuring that the mower glides smoothly over obstacles.

The cutting deck of the Sears 113.17066 is designed for versatility, featuring multiple cutting height settings. This allows users to customize their lawn's appearance according to personal preferences and seasonal requirements. Whether it's a low trim for a manicured look or a higher cut for a healthier lawn, the adjustable deck ensures optimal results every time.

Technologically, the Sears 113.17066 also incorporates a robust bagging system that efficiently collects grass clippings. This feature not only helps keep the lawn tidy but also makes cleanup easy and convenient. Additionally, the mower is designed with a durable chassis and high-quality materials, contributing to its overall longevity and user satisfaction.

Safety features are paramount in the Sears 113.17066 design, with controls conveniently placed for easy access. The mower includes a blade brake system that allows for instant stopping, ensuring that users can operate the machine confidently without compromising safety.

In summary, the Sears 113.17066 is an excellent choice for those seeking a reliable and efficient lawn mower. With its powerful engine, self-propelled functionality, adjustable cutting heights, and user-centric design, this model combines performance with convenience to meet diverse lawn care needs. Its commitment to durability and safety further solidifies its place as a trusted option for homeowners everywhere.